Question about Meanwell RT-85A psu with HAS v5.0 setup.....

[PC Engine Fan X!]

Just recently got a HAS v5.0 supergun & a Meanwell RT-85A power supply unit (which auto-switches between 100v & 240v) to power it up properly. On the MW RT-85A psu, which screw is "ground" located on? https://www.amazon.com/MEAN-WELL-RT-85A ... 289&sr=8-1 Upon ordering the MW RT-85A psu off of amazon, it diidn't not come with an A/C cord. Which "USA region A/C power cord with a power switch is recommended for it?

Would this rocker power switch be recommended?
https://www.amazon.com/3Dman-Rocker-Swi ... Y5MYZ&th=1

In regards to hooking up the above listed rocker power switch, is it necessary to hook up the ground or is it fine to just hook up both "N" & "L" on the MW RT-85A psu's A/C inputs without using "ground" period?

PC Engine Fan X! ^_~

[RGB]

The first three screws are for AC only, it's where the AC cable should be attached. The ground/earth should be hooked up.



Additional information - https://rgbslab.com/pages/has-faq

There's a handy terminal cover for the Mean Well PSUs that you can 3D print yourself or buy pre-assembled for a fair price from this seller - https://www.arcade-projects.com/threads ... les.23195/

PS Thank you for purchasing the newest HAS! I hope it will serve you well. Besides the rapid-fire, it's got at least two features that alter gameplay in shmups, the hardware "arrange mode" and hardware ship slowdown (similar to "focus shot").

[PC Engine Fan X!]

Thank you RGB for that informative info with the Meanwell RT-85A psu. I didn't know that the COM screw section was Ground -- good to know. This particular arcade psu didn't come with accompanying instructions/diagram to further explain which screw section is used for.

Once I get the above ordered rocker power switch, I'll be able to finally power it up properly.

Just looking through the HAS v5.0 printed out instruction manual, it does have a lot more "bells and whistles" in regards to my older HAS v3.0 setup indeed. The included tiny OLED screen with infometrics/voltameter definitely seals the deal with this latest HAS v5.0 release.

Thanks again,

PC Engine Fan X! ^_~