BVM-20F1U scart rgb cables question

The place for all discussion on gaming hardware
Post Reply
Nocturnal
Posts: 11
Joined: Sat Aug 15, 2015 1:46 pm
Location: Australia

BVM-20F1U scart rgb cables question

Post by Nocturnal »

Hi
Managed to track down and purchase a BVM-20F1A (Australian)

Just wanted to know, i am going to by a scart switch that will connect to the bvm through the bnc connectors. But do i need a special type of scart rgb cable for this (Csync etc) or should any good one work (Like from retro console accessories)

Im looking at snes, megadrive/genesis 1, playstation, and saturn.

Thanks
Blaasvis
Posts: 10
Joined: Mon Sep 08, 2014 8:39 am

Re: BVM-20F1U scart rgb cables question

Post by Blaasvis »

The answer is no. I myself have a 20F1E. I feed it both CSYNC and composite sync.
And have zero problems, I build the cable myself. I have not connect a neo-geo or saturn.
But all other home consoles are fine.
Nocturnal
Posts: 11
Joined: Sat Aug 15, 2015 1:46 pm
Location: Australia

Re: BVM-20F1U scart rgb cables question

Post by Nocturnal »

Champion

Thank you very much :)
Post Reply