Hi
Managed to track down and purchase a BVM-20F1A (Australian)
Just wanted to know, i am going to by a scart switch that will connect to the bvm through the bnc connectors. But do i need a special type of scart rgb cable for this (Csync etc) or should any good one work (Like from retro console accessories)
Im looking at snes, megadrive/genesis 1, playstation, and saturn.
Thanks
BVM-20F1U scart rgb cables question
-
Nocturnal
- Posts: 11
- Joined: Sat Aug 15, 2015 1:46 pm
- Location: Australia
-
Blaasvis
- Posts: 10
- Joined: Mon Sep 08, 2014 8:39 am
Re: BVM-20F1U scart rgb cables question
The answer is no. I myself have a 20F1E. I feed it both CSYNC and composite sync.
And have zero problems, I build the cable myself. I have not connect a neo-geo or saturn.
But all other home consoles are fine.
And have zero problems, I build the cable myself. I have not connect a neo-geo or saturn.
But all other home consoles are fine.
-
Nocturnal
- Posts: 11
- Joined: Sat Aug 15, 2015 1:46 pm
- Location: Australia
Re: BVM-20F1U scart rgb cables question
Champion
Thank you very much
Thank you very much