Need AMP 12-way connector.

The place for all discussion on gaming hardware
Post Reply
Mikey
Posts: 166
Joined: Thu May 04, 2006 7:47 pm

Need AMP 12-way connector.

Post by Mikey »

Well these are elusive. Connector like this but with 12 pins. The pins need to be this shape, since I already have the female one wired.
http://cgi.ebay.com/AMP-172169-1-9-Pos- ... ltDomain_0
User avatar
emphatic
Posts: 7984
Joined: Mon Aug 18, 2008 3:47 pm
Location: Alingsås, Sweden
Contact:

Re: Need AMP 12-way connector.

Post by emphatic »

Look here: http://www.starcab.net/index.php?cPath= ... 95cceb6682

Are you sure it's an AMP connector though? If it's for an EGRET II control panel for example, then it's not an AMP but a JST (even harder to find).
Image | My games - http://www.emphatic.se
RegalSin wrote:Street Fighters. We need to aviod them when we activate time accellerator.
Mikey
Posts: 166
Joined: Thu May 04, 2006 7:47 pm

Re: Need AMP 12-way connector.

Post by Mikey »

Looking at Starcab, it seems to be a JST. It's just like the one in the eBay link, but with 12 pins instead of 9. The pins are square with a single circular hole, though 2 pins are keyed with notches on the corners.
User avatar
kernow
Posts: 1225
Joined: Mon May 26, 2008 8:26 pm
Location: Plymouth, Devon, UK

Re: Need AMP 12-way connector.

Post by kernow »

Is it for an E2 control panel then? if so, I have them with pins.
Mikey
Posts: 166
Joined: Thu May 04, 2006 7:47 pm

Re: Need AMP 12-way connector.

Post by Mikey »

It's in a mid-90s Electrocoin cabinet, like the one below, but with guns. I need to wire up the connector for regular joystick controls.

Image
Post Reply