Well these are elusive. Connector like this but with 12 pins. The pins need to be this shape, since I already have the female one wired.
http://cgi.ebay.com/AMP-172169-1-9-Pos- ... ltDomain_0
Need AMP 12-way connector.
-
emphatic
- Posts: 8030
- Joined: Mon Aug 18, 2008 3:47 pm
- Location: Alingsås, Sweden
- Contact:
Re: Need AMP 12-way connector.
Look here: http://www.starcab.net/index.php?cPath= ... 95cceb6682
Are you sure it's an AMP connector though? If it's for an EGRET II control panel for example, then it's not an AMP but a JST (even harder to find).
Are you sure it's an AMP connector though? If it's for an EGRET II control panel for example, then it's not an AMP but a JST (even harder to find).
| My games - http://www.emphatic.seRegalSin wrote:Street Fighters. We need to aviod them when we activate time accellerator.
-
Mikey
- Posts: 166
- Joined: Thu May 04, 2006 7:47 pm
Re: Need AMP 12-way connector.
Looking at Starcab, it seems to be a JST. It's just like the one in the eBay link, but with 12 pins instead of 9. The pins are square with a single circular hole, though 2 pins are keyed with notches on the corners.
-
kernow
- Posts: 1225
- Joined: Mon May 26, 2008 8:26 pm
- Location: Plymouth, Devon, UK
Re: Need AMP 12-way connector.
Is it for an E2 control panel then? if so, I have them with pins.
-
Mikey
- Posts: 166
- Joined: Thu May 04, 2006 7:47 pm
Re: Need AMP 12-way connector.
It's in a mid-90s Electrocoin cabinet, like the one below, but with guns. I need to wire up the connector for regular joystick controls.

