Mushihime-sama Futari Black Label PCB, graphical issues

The place for all discussion on gaming hardware
Post Reply
redfield0009
Posts: 15
Joined: Thu Dec 22, 2011 4:05 am
Location: US

Mushihime-sama Futari Black Label PCB, graphical issues

Post by redfield0009 »

I recently bought a MFBL kit from HE and after giving it a good play through I discovered what looks to be some type of possible glitch or sprite corruption during the first boss. If your character ventures too close to the left side of the screen then the very edge will distort to various shades of blue and green. HE said they were going to contact cave to see about getting it repaired... now they are coming back to me saying another customer has the same issue and this might be normal. Can anyone confirm? The version I have is not the international version if that matters. A video can be found here. http://www.youtube.com/watch?v=eTCE_ixA ... eok8CTTQJb

I appreciate any help.
User avatar
kernow
Posts: 1225
Joined: Mon May 26, 2008 8:26 pm
Location: Plymouth, Devon, UK

Re: Mushihime-sama Futari Black Label PCB, graphical issues

Post by kernow »

Measure your +5v
User avatar
system11
Posts: 6294
Joined: Tue Jan 25, 2005 10:17 pm
Location: UK
Contact:

Re: Mushihime-sama Futari Black Label PCB, graphical issues

Post by system11 »

Mine does it too - dependant on how many bullets and where they are in relation to you and the left side of the screen - timing issue in the hardware/code itself, I'd ignore it. Mine does purple/blue mostly.
System11's random blog, with things - and stuff!
http://blog.system11.org
redfield0009
Posts: 15
Joined: Thu Dec 22, 2011 4:05 am
Location: US

Re: Mushihime-sama Futari Black Label PCB, graphical issues

Post by redfield0009 »

Thanks for the confirmation!

As far as measuring the +5, I can't do that at the moment as I don't have a voltmeter. I took the board out of the cab and put it back in the box until I could get this figured out. I'll grab a voltmeter this weekend but so far it looks to be a confirmed issue.

Thanks again!
LARGE KRO
Posts: 63
Joined: Mon Oct 09, 2006 10:52 am
Location: Paris ,France

Re: Mushihime-sama Futari Black Label PCB, graphical issues

Post by LARGE KRO »

All SH-3 boards tend to produce some stange things in this area of the screen, it goes from a darker colors band to a few artifacts depending of the game.
Then it also depends of what monitor the game is running on. With my Nanao MS9 I tend to have darker colors noticeable
on brighter backgrounds and a strange thin line alternatively missing on the score while playing Deathsmiles.

It's a common issue, I just adjust the screen size and position to make it look fine :wink:
User avatar
rtw
Posts: 1949
Joined: Wed Jan 26, 2005 6:46 pm
Location: Norway
Contact:

Re: Mushihime-sama Futari Black Label PCB, graphical issues

Post by rtw »

@redfield0009

Take a look at the picture below and tell me if your CAVE logo has similar artifacts.

Image
http://world-of-arcades.net
The future of ST-V rests upon our work and your work
User avatar
SuperPang
Posts: 956
Joined: Mon Feb 14, 2005 12:20 pm
Location: UK
Contact:

Re: Mushihime-sama Futari Black Label PCB, graphical issues

Post by SuperPang »

rtw wrote: Take a look at the picture below and tell me if your CAVE logo has similar artifacts.
Oh noes! :lol:
redfield0009
Posts: 15
Joined: Thu Dec 22, 2011 4:05 am
Location: US

Re: Mushihime-sama Futari Black Label PCB, graphical issues

Post by redfield0009 »

@ rtw, I don't have any artifacts on the main cave logo during start up. I did notice something though. As I have been playing the gaming and amping up the difficulty, there are no artifacts during the boss fight, no issues at all in manic and god mode, just original.

@ LARGE KRO, As far as that deathsmiles bar goes, I know what your talking about. Adjust the crosshatch in the test menu. Lower your overall screen size and then lower the cross hatch just a bit, that should give you the full view of the score. I didn't figure that out until I bought the PCB a second time.
User avatar
cools
Posts: 2057
Joined: Mon Nov 26, 2007 4:57 pm
Location: South Wales
Contact:

Re: Mushihime-sama Futari Black Label PCB, graphical issues

Post by cools »

Futari 1.5 has corruption on the very far left during the first boss also, when the screen shakes.
Image
LARGE KRO
Posts: 63
Joined: Mon Oct 09, 2006 10:52 am
Location: Paris ,France

Re: Mushihime-sama Futari Black Label PCB, graphical issues

Post by LARGE KRO »

@ LARGE KRO, As far as that deathsmiles bar goes, I know what your talking about. Adjust the crosshatch in the test menu. Lower your overall screen size and then lower the cross hatch just a bit, that should give you the full view of the score. I didn't figure that out until I bought the PCB a second time.


Sure, I will try that. I must admit I did not go too far in the test menus. Once I got the game options set it seems Ok for me.
I remember Ibara has extended configuration options in the menu, giving you access to the brightness and contrast settings of the game but I did not even notice that cross hatch settings in the other games. Thanks a lot Redfield !
User avatar
brentsg
Posts: 2303
Joined: Sun Jul 12, 2009 9:01 pm
Location: St. Louis, MO USA

Re: Mushihime-sama Futari Black Label PCB, graphical issues

Post by brentsg »

redfield0009 wrote:I recently bought a MFBL kit from HE and after giving it a good play through I discovered what looks to be some type of possible glitch or sprite corruption during the first boss. If your character ventures too close to the left side of the screen then the very edge will distort to various shades of blue and green. HE said they were going to contact cave to see about getting it repaired... now they are coming back to me saying another customer has the same issue and this might be normal. Can anyone confirm? The version I have is not the international version if that matters. A video can be found here. http://www.youtube.com/watch?v=eTCE_ixA ... eok8CTTQJb

I appreciate any help.
I'm drawing a blank.. who is HE?
Breaking news: Dodonpachi Developer Cave Releases Hello Kitty Game
User avatar
kernow
Posts: 1225
Joined: Mon May 26, 2008 8:26 pm
Location: Plymouth, Devon, UK

Re: Mushihime-sama Futari Black Label PCB, graphical issues

Post by kernow »

highway entertainment?
redfield0009
Posts: 15
Joined: Thu Dec 22, 2011 4:05 am
Location: US

Re: Mushihime-sama Futari Black Label PCB, graphical issues

Post by redfield0009 »

Correct, I got it from Highway Entertainment. Glad to know the issue is normal. :mrgreen:
Post Reply