Scart to component(YUV) Converter Problem
-
slai50
- Posts: 79
- Joined: Sun Dec 10, 2006 8:25 pm
Scart to component(YUV) Converter Problem
has anyone tried to use the CVS287 scart to component adapter on a 27 inch sony wega kv-fs120 CRT TV? I tried connecting a US sega saturn and a pc engine duo-r and can hardly get a picture. When I tried the saturn, i get an extremely dark screen and the picture keeps scrolling up and down nonstop. When I tried the pc engine duo-r, i don't get a picture at all, just a black screen. I have 2 of the same sony wega CRT and got the same results with both TVs. Is the scart to component converter not compaible with my wega CRTs? The seller is going to send me another scart to component converter to make sure the one i have isn't defective. I want to play my saturn and duo-r in RGB dammit! Any help or advice would be greatly appreciated.
-
undamned
- Posts: 3273
- Joined: Sat Jan 29, 2005 9:27 am
- Location: Phoenix
Re: Scart to component(YUV) Converter Problem
Is it powered?
-ud
-ud
Righteous Super Hero / Righteous Love
-
antron
- Posts: 2861
- Joined: Wed Feb 22, 2006 7:53 pm
- Location: Egret 29, USA
Re: Scart to component(YUV) Converter Problem
I think it's the unit. I haven't has any problems like that on my Wega with my cheap SCART to Component ebay converter (which is probably the unit of which you speak).
I even used it with a supergun with no problems, so it even accepts c-sync.
I even used it with a supergun with no problems, so it even accepts c-sync.
-
slai50
- Posts: 79
- Joined: Sun Dec 10, 2006 8:25 pm
Re: Scart to component(YUV) Converter Problem
yes it is powered and the light comes on but can;t get a decent pictureundamned wrote:Is it powered?
-ud