240p from 360 on PVM-2950Q

The place for all discussion on gaming hardware
Post Reply
cstle
Posts: 136
Joined: Mon Jul 26, 2010 6:42 pm

240p from 360 on PVM-2950Q

Post by cstle »

Is it possible without an (relatively expensive) downscaler? Or are there cheap downscalers? Or is 480i adequate or what. I'm clueless. :(

note - I don't have one right now but there's someone in my area selling etc and I want to make sure I'm not going to waste its capabilities if I get one
User avatar
Fudoh
Posts: 13041
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: 240p from 360 on PVM-2950Q

Post by Fudoh »

You can do this by using an Extron RGB interface with sync processing. They're $20 on eBay. Here's the thread on it: http://shmups.system11.org/viewtopic.ph ... 6&start=60
cstle
Posts: 136
Joined: Mon Jul 26, 2010 6:42 pm

Re: 240p from 360 on PVM-2950Q

Post by cstle »

Would a regular Extron Super Emotia work? I see some decently priced on eBay
User avatar
Fudoh
Posts: 13041
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: 240p from 360 on PVM-2950Q

Post by Fudoh »

Sure. Emotia does a 480p to 240p conversion (VGA to RGBs), while the Extron interfaces do 480i RGBs to 240p RGBs.
cstle
Posts: 136
Joined: Mon Jul 26, 2010 6:42 pm

Re: 240p from 360 on PVM-2950Q

Post by cstle »

I think I'll go with the Emotia since I'll be able to do MAME through it as well (I have a spare VGA port)

Thanks :)

Are there any specific RGB cables I should use for the Emotia->PVM or just grab any off of Monoprice?
User avatar
Fudoh
Posts: 13041
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: 240p from 360 on PVM-2950Q

Post by Fudoh »

your 2950Q has direct RGBS BNC inputs (4x BNC), right ? If so, just use the cheapest BNC to BNC cables you can find.
cstle
Posts: 136
Joined: Mon Jul 26, 2010 6:42 pm

Re: 240p from 360 on PVM-2950Q

Post by cstle »

I just noticed that these Emotias on ebay don't have the power cable and such.

Where do I get one :oops:
dieKatze88
Posts: 613
Joined: Sat Sep 12, 2009 1:27 am

Re: 240p from 360 on PVM-2950Q

Post by dieKatze88 »

cstle wrote:I just noticed that these Emotias on ebay don't have the power cable and such.

Where do I get one :oops:
I'm working on writing instructions on how to build a power supply. 35 dollars for a 3rd party replacement is retarded.
cstle
Posts: 136
Joined: Mon Jul 26, 2010 6:42 pm

Re: 240p from 360 on PVM-2950Q

Post by cstle »

dieKatze88 wrote:
cstle wrote:I just noticed that these Emotias on ebay don't have the power cable and such.

Where do I get one :oops:
I'm working on writing instructions on how to build a power supply. 35 dollars for a 3rd party replacement is retarded.
Can you show me where you found it? I'm not good at building stuff.
dieKatze88
Posts: 613
Joined: Sat Sep 12, 2009 1:27 am

Re: 240p from 360 on PVM-2950Q

Post by dieKatze88 »

cstle wrote:
dieKatze88 wrote:
cstle wrote:I just noticed that these Emotias on ebay don't have the power cable and such.

Where do I get one :oops:
I'm working on writing instructions on how to build a power supply. 35 dollars for a 3rd party replacement is retarded.
Can you show me where you found it? I'm not good at building stuff.
Ebay.
User avatar
SunJammer
Posts: 142
Joined: Tue May 24, 2011 5:54 pm
Location: Seattle, WA

Re: 240p from 360 on PVM-2950Q

Post by SunJammer »

what i did was search eBay for "5-pin DIN power supply," just make to find one with specifications as close to the official extron PSU as possible.
some helpful links:
http://shmups.system11.org/viewtopic.php?f=6&t=27009 (pinout must match this one)
http://shmups.system11.org/viewtopic.php?f=6&t=31603 (voltage requirements)
Post Reply