Console --> Arcade monitor adapter (AVAILABLE, see 1st post)

ArcadeNerd · Post by **ArcadeNerd** » Wed Dec 15, 2010 1:45 am

Sweet....

FLTCHRR · Post by **FLTCHRR** » Wed Dec 15, 2010 6:14 am

I'm not sure how many are being made this round, but please add me to the list.

I'm also very interested in the control adapters when they are ready.

I'm really excited for this!

bitkid · Post by **bitkid** » Thu Dec 16, 2010 12:54 am

I haven't gotten any notifications about any kind of list but I'd like to re-express my interest just in case my post got overlooked. If I've missed out on this round I guess I'll just have to wait.

lowemark · Post by **lowemark** » Thu Dec 16, 2010 8:14 am

bitkid wrote:I haven't gotten any notifications about any kind of list but I'd like to re-express my interest just in case my post got overlooked.

the same goes for me, haven't heard anything..

neorichieb1971 · Post by **neorichieb1971** » Thu Dec 16, 2010 8:25 am

In case you didn't read. Viletim lets you show interest by posting. At the time of production he scans through the posts and makes it known the new product is available. Thats how it worked last time anyway.

This time he might just change the header to read "now available".

don't worry, there will be enough units to satisfy immediate demand. He is not going to cut his own profits by restricting the amounts made.

ckong · Post by **ckong** » Thu Dec 16, 2010 9:45 am

neorichieb1971 wrote:...... don't worry, there will be enough units to satisfy immediate demand. He is not going to cut his own profits by restricting the amounts made.

that is correct. This is what Viletim e-mailed me last week: 'I will have lots of stock, no change of running
out any time soon.'

So indeed don't worry.

neorichieb1971 · Post by **neorichieb1971** » Thu Dec 16, 2010 9:59 am

More importantly Viletim. We want feet.

viletim · Post by **viletim** » Thu Dec 16, 2010 3:28 pm

I have bad news. After testing boards today I've discovered a problem: one component is incorrect. It will take me approximately two weeks to source replacement components and rework the boards. I was going to start taking orders at the end of this week, but now I'll leave it untill the start of the new year.

The component is a CMOS switch IC, part of the support circuitry for the controller expansion (work in progress) - it's not aparent there's a problem when adapter is run by itself. What's in it's place now is apparently a logic OR gate.

Reiterating.... I am not taking orders yet, I am not taking pre-orders. If you would like an email/PM when they are available to order you need only give the most subtle suggestion that you may be vaguely interested and you are automatically on the list. Please don't send me five emails, a PM, and complan in the thread that I haven't answered your email 20 minutes later. I have lots of adapters, nobody will miss out.

Biohazard53 · Post by **Biohazard53** » Thu Dec 16, 2010 3:59 pm

thanks for the update viletim, I have no doubt this will be an awesome product I have purchased from you in the past and look forward to this new adapter keep up the good work, and it will be a nice way to start the new year

emphatic · Post by **emphatic** » Thu Dec 16, 2010 4:42 pm

Take your time. It's all for the better.

ckong · Post by **ckong** » Thu Dec 16, 2010 4:51 pm

emphatic wrote:Take your time. It's all for the better.

+1

It doesn't have to be January, February is also fine if that means that you can have a nice and relaxed Xmas holiday.

Trevor spencer · Post by **Trevor spencer** » Thu Dec 16, 2010 6:02 pm

I havnt even got a cab yet so i dont mind waiting

just dont want to miss out on this fine bit of kit

neorichieb1971 · Post by **neorichieb1971** » Thu Dec 16, 2010 6:26 pm

January is fine by me. My cabs are in the garage and its freezing cold in there. So I've not turned them on for 2 months.

Almighty · Post by **Almighty** » Thu Dec 16, 2010 8:28 pm

no hurry for me either

ArcadeNerd · Post by **ArcadeNerd** » Thu Dec 16, 2010 11:32 pm

Yup, no biggie. I have a sneaky suspicion that these are totally gonna be worth the wait. Thanks for the update.

monouchi · Post by **monouchi** » Fri Dec 17, 2010 7:50 pm

Yeah, take your time.
Sending stuff around christmas can be a gamble too.

Gabranth · Post by **Gabranth** » Tue Dec 21, 2010 11:54 pm

viletim wrote:I have lots of adapters, nobody will miss out.

Great !

Skykid · Post by **Skykid** » Thu Dec 30, 2010 3:52 pm

Take your time dude, xmas has left me effing broke.

Sparda · Post by **Sparda** » Mon Jan 03, 2011 2:12 pm

I hope viletim and the adapter arent submerged right now

viletim · Post by **viletim** » Mon Jan 03, 2011 2:43 pm

Sparda wrote:I hope viletim and the adapter arent submerged right now

No, I wouldn't live on a floodplain...

See the first post. The adapters are available now!

...and before somebody says something, I'll send a message to everybody on the list tomorrow. I'm out of time tonight.

neorichieb1971 · Post by **neorichieb1971** » Mon Jan 03, 2011 5:46 pm

According to yourself Viletim the 2.0 model isn't going to do anything different from 1.0 right?

I want to order now but since supplies are limitless to a degree I would rather wait until your controller modules come out. Any idea when that is?

Also, I am a little concerned mods might have to be done down the line for the controller aspect of it. Are you certain the controller module aspect of the 2.0 works as described in your previous posts?

Great product btw..

Trevor spencer · Post by **Trevor spencer** » Mon Jan 03, 2011 6:27 pm

neorichieb1971 wrote:According to yourself Viletim the 2.0 model isn't going to do anything different from 1.0 right?

I want to order now but since supplies are limitless to a degree I would rather wait until your controller modules come out. Any idea when that is?

Also, I am a little concerned mods might have to be done down the line for the controller aspect of it. Are you certain the controller module aspect of the 2.0 works as described in your previous posts?

Great product btw..

+1

emphatic · Post by **emphatic** » Mon Jan 03, 2011 7:09 pm

Ordered!

viletim · Post by **viletim** » Tue Jan 04, 2011 1:29 am

neorichieb1971 wrote:According to yourself Viletim the 2.0 model isn't going to do anything different from 1.0 right?

The audio section is a bit different. Using 3.5mm Jacks instead of RCA, and there's an audio input now.
The JAP RGB 21 socket is not included unless you ask for it specially, and it will be a few weeks until they're ready anyway. PCB feet are not included either but I'll include them for a few dollars extra when I get some in. Mounting the feet will be a part of the documentation, not yet finished.

neorichieb1971 wrote: I want to order now but since supplies are limitless to a degree I would rather wait until your controller modules come out. Any idea when that is?

I expect many people will do the same. I really can't give any indication how long they will take yet, I will let everybody know once I make a bit more progress.

neorichieb1971 wrote: Also, I am a little concerned mods might have to be done down the line for the controller aspect of it. Are you certain the controller module aspect of the 2.0 works as described in your previous posts?

Of corse.

s8n · Post by **s8n** » Tue Jan 04, 2011 1:33 am

howdy viletim...........

can we see a photo of the control expansion 1 and control expansion 2 ?

neorichieb1971 · Post by **neorichieb1971** » Tue Jan 04, 2011 1:45 am

If it helps viletim. I will probably order 2, one with JAP21 and one with Euro RGB. Might as well cover both bases. I will order when I can get everything I want in one big parcel.

I assume the 3.5mm audio jack totally eliminates the buzzing of a scart connector?

s8n · Post by **s8n** » Tue Jan 04, 2011 3:30 am

thanks for the PM viletim...........the pics on your Website covers what i requested.

viletim · Post by **viletim** » Tue Jan 04, 2011 4:01 am

neorichieb1971 wrote:I assume the 3.5mm audio jack totally eliminates the buzzing of a scart connector?

Yes, it can elinate the buzzing on consoles which have seperate audio outputs such as some models of Playstation and Mega Drive.

monouchi · Post by **monouchi** » Tue Jan 04, 2011 6:46 am

Im going to order one later too, low on cash right now.

Just a thought I had.
Is the speakers in a EGRET II in serie or paralell? (Anyone?)
It says on your page that the speakers must have an impedance of 8 Ohm or higher.
EGRET II speakers are 4 Ohm.

DarthBoMan · Post by **DarthBoMan** » Tue Jan 04, 2011 7:24 am

Great to hear that it is available!

However, I am (as most people) low on funds thanks to X-mas. I hope these don't sell out to quickly *fingers crossed*

shmups.system11.org

Console --> Arcade monitor adapter (AVAILABLE, see 1st post)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (SOLD OUT)

Re: Console --> Arcade monitor adapter (AVAILABLE, see 1st post)

Re: Console --> Arcade monitor adapter (AVAILABLE, see 1st post)

Re: Console --> Arcade monitor adapter (AVAILABLE, see 1st post)

Re: Console --> Arcade monitor adapter (AVAILABLE, see 1st post)

Re: Console --> Arcade monitor adapter (AVAILABLE, see 1st post)

Re: Console --> Arcade monitor adapter (AVAILABLE, see 1st post)

Re: Console --> Arcade monitor adapter (AVAILABLE, see 1st post)

Re: Console --> Arcade monitor adapter (AVAILABLE, see 1st post)

Re: Console --> Arcade monitor adapter (AVAILABLE, see 1st post)

Re: Console --> Arcade monitor adapter (AVAILABLE, see 1st post)