FG-1E bulb starters for Candy cabinets

The place for all discussion on gaming hardware
Post Reply
neorichieb1971
Posts: 7882
Joined: Wed Jan 26, 2005 1:28 am
Location: Bedford, UK
Contact:

FG-1E bulb starters for Candy cabinets

Post by neorichieb1971 »

I thought I would start a new thread as this might be a good reference point for some (discussed in Oxtsu's thread).

The FG-1E bulb starter can be found here in the UK -

http://www.lampco.co.uk/results.asp?sec ... %2FStarter


Pretty expensive but at least someone has them.

I found that out of my 2 cabinets one had the starter completely missing and the other was charcoaled. The bulbs look OK at first glance. Hopefully new starters will fix the situation.

Does anyone know how long the starters will last?
This industry has become 2 dimensional as it transcended into a 3D world.
User avatar
SuperPang
Posts: 950
Joined: Mon Feb 14, 2005 12:20 pm
Location: UK
Contact:

Re: FG-1E bulb starters for Candy cabinets

Post by SuperPang »

Did this work out man? I just ordered one. :)
User avatar
brentsg
Posts: 2303
Joined: Sun Jul 12, 2009 9:01 pm
Location: St. Louis, MO USA

Re: FG-1E bulb starters for Candy cabinets

Post by brentsg »

The light in my Candy drives me crazy and when I had it turned around recently I pulled the starter out to shut it off. For a couple days the light never came on, so I thought it was all good. Every great once in a while it flickers but generally it's dark.

I should have taken out the bulb but I couldn't think where to put it that my little kids wouldn't possibly reach it.

Should I just snip the wires to the light, or can I leave the starter out without doing any damage?
Breaking news: Dodonpachi Developer Cave Releases Hello Kitty Game
neorichieb1971
Posts: 7882
Joined: Wed Jan 26, 2005 1:28 am
Location: Bedford, UK
Contact:

Re: FG-1E bulb starters for Candy cabinets

Post by neorichieb1971 »

SuperPang wrote:Did this work out man? I just ordered one. :)
I bought 3 from lampco.uk and they arrived whilst I was on holiday. Not had a chance to put them in yet, was busy with the joysticks when I got back.
This industry has become 2 dimensional as it transcended into a 3D world.
User avatar
jonny5
Posts: 5081
Joined: Sat Feb 16, 2008 5:48 pm
Location: toronto

Re: FG-1E bulb starters for Candy cabinets

Post by jonny5 »

brentsg wrote:The light in my Candy drives me crazy and when I had it turned around recently I pulled the starter out to shut it off. For a couple days the light never came on, so I thought it was all good. Every great once in a while it flickers but generally it's dark.

I should have taken out the bulb but I couldn't think where to put it that my little kids wouldn't possibly reach it.

Should I just snip the wires to the light, or can I leave the starter out without doing any damage?
ummmm....what? without the starter the light shouldnt come on at all.... :?
User avatar
brentsg
Posts: 2303
Joined: Sun Jul 12, 2009 9:01 pm
Location: St. Louis, MO USA

Re: FG-1E bulb starters for Candy cabinets

Post by brentsg »

jonny5 wrote: ummmm....what? without the starter the light shouldnt come on at all.... :?
Heh well I can confirm that it will occasionally flicker. It would make quite the boring youtube video though. :wink:
Breaking news: Dodonpachi Developer Cave Releases Hello Kitty Game
User avatar
jonny5
Posts: 5081
Joined: Sat Feb 16, 2008 5:48 pm
Location: toronto

Re: FG-1E bulb starters for Candy cabinets

Post by jonny5 »

perhaps your cab is possessed :wink:
neorichieb1971
Posts: 7882
Joined: Wed Jan 26, 2005 1:28 am
Location: Bedford, UK
Contact:

Re: FG-1E bulb starters for Candy cabinets

Post by neorichieb1971 »

The lampco FG-1E starters worked like a charm. Both bulbs are really bright but not in a bad way.

I have to say I prefer the Astro light to the AWSD light. The AWSD is waaaaaaay too bright. Its like someone turning the main light switch on.

Anyway, i'm happy.. got one spare but keeping it. Thanks to everyone involved in this thread. :)
This industry has become 2 dimensional as it transcended into a 3D world.
User avatar
drunkninja24
Posts: 1802
Joined: Thu Oct 01, 2009 3:27 am
Location: MO

Re: FG-1E bulb starters for Candy cabinets

Post by drunkninja24 »

Is there anywhere else or anyone that has these? The starter in my Astro bit the dust, and I can't seem to find these anywhere. The few places online I found them wouldn't let me place a less than $25 order :/

EDIT: nvm, finally found one:

http://www.bulbconnection.com/ViewSIMIt ... /item.html

For anyone else who may be looking.
neorichieb1971
Posts: 7882
Joined: Wed Jan 26, 2005 1:28 am
Location: Bedford, UK
Contact:

Re: FG-1E bulb starters for Candy cabinets

Post by neorichieb1971 »

Oxtsu said he could get some cheap. I don't know his supplier though, PM him.
This industry has become 2 dimensional as it transcended into a 3D world.
Biohazard53
Posts: 27
Joined: Mon Jul 20, 2009 3:34 pm

Re: FG-1E bulb starters for Candy cabinets

Post by Biohazard53 »

drunkninja keep us updated if it works I need one too.
User avatar
drunkninja24
Posts: 1802
Joined: Thu Oct 01, 2009 3:27 am
Location: MO

Re: FG-1E bulb starters for Candy cabinets

Post by drunkninja24 »

Biohazard53 wrote:drunkninja keep us updated if it works I need one too.
Will do, the cost of the thing from that site was about $10 after shipping. A little more expensive than I imagined, but not horrible.
User avatar
drunkninja24
Posts: 1802
Joined: Thu Oct 01, 2009 3:27 am
Location: MO

Re: FG-1E bulb starters for Candy cabinets

Post by drunkninja24 »

Just got mine in from Bulb Connections, works perfectly, light flared up like new! Not sure how many this site has in stock or if they can restock them, so you might want to pick them up!
Biohazard53
Posts: 27
Joined: Mon Jul 20, 2009 3:34 pm

Re: FG-1E bulb starters for Candy cabinets

Post by Biohazard53 »

drunkninja24 wrote:Just got mine in from Bulb Connections, works perfectly, light flared up like new! Not sure how many this site has in stock or if they can restock them, so you might want to pick them up!
sweet I went ahead and ordered one thanks for being the guinea pig :lol:
Post Reply