XRGB-3 and Sega Saturn FPGA B1 mode?

redfish · Post by **redfish** » Wed Mar 19, 2008 7:53 am

Hey,

I am trying to use my SS in FPGA B01 mode but it looks like it's on acid, all the colors are psychedelic, like a negative or something. Can anyone tell me how to fix this? thanks.

Fudoh · Post by **Fudoh** » Wed Mar 19, 2008 9:22 am

Scart port set to YPbPr instead of RGB ? Just a guess though...

Post by **undamned** » Wed Mar 19, 2008 3:34 pm

redfish wrote:SS in FPGA B01 mode

How do you do that? ...and what is it?
-ud

redfish · Post by **redfish** » Wed Mar 19, 2008 3:45 pm

On the sega saturn or the xrgb-3? I didnt know there was a YPRPB setting for the scart port on the xrgb-3. I know there isn't on the saturn. I also have it hooked up via composite, so.. scart / jrgb settings probably are not going to effect it.

redfish · Post by **redfish** » Wed Mar 19, 2008 4:04 pm

undamned wrote:
redfish wrote:SS in FPGA B01 mode
How do you do that? ...and what is it?
-ud

B1 mode in the FPGA bank is XRGb-2 mode, supposedly except it seems to not be compatible with ANYTHING. And its pissing me off.

Fudoh · Post by **Fudoh** » Wed Mar 19, 2008 6:50 pm

B1 mode in the FPGA bank is XRGb-2 mode, supposedly except it seems to not be compatible with ANYTHING. And its pissing me off.

B1 actually works fine, but I remember there was some issue with the DVI output of the XRGB3 *WHILE* in B1 mode. If you have easy access to a VGA cable you could try using VGA instead of DVI for the B1 output.

shmups.system11.org

XRGB-3 and Sega Saturn FPGA B1 mode?

XRGB-3 and Sega Saturn FPGA B1 mode?

Re: XRGB-3 and Sega Saturn FPGA B1 mode?

Re: XRGB-3 and Sega Saturn FPGA B1 mode?