Requirements for playing Ibara PCB?

Spitlips · Post by **Spitlips** » Sat May 12, 2007 5:45 pm

If i was to buy a cab, what would I need to be able to play Ibara? A supermodern monitor? A certain type of adapter?

zakk · Post by **zakk** » Sat May 12, 2007 5:51 pm

All you need is a jamma compatible cabinet.

Spitlips · Post by **Spitlips** » Sat May 12, 2007 6:32 pm

thanks zakk,

thats a relief.
I have found a cheap jamma cab where I live, but I wanted to make sure I could play modern games on it first.

Circa2113 · Post by **Circa2113** » Sat May 12, 2007 6:33 pm

zakk wrote:All you need is a jamma compatible cabinet.

Also worth mentioning that you need a vertical monitor. Obvious, yes, but you never know.

Spitlips · Post by **Spitlips** » Sun May 13, 2007 10:31 am

Ok, I did a bit of research and what you need is a monitor capable of handling a VGA (31khz) hi res signal.

So... besides jamma, I need a tri-sync monitor

PC Engine Fan X! · Post by **PC Engine Fan X!** » Sun May 13, 2007 2:02 pm

For Splitlips,

Actually, the Cave produced Ibara arcade PCB kit is perfectly capable of supporting the true low resolution 15 kHz analog RGB monitors...so there's really no need to go with the tri-sync arcade monitor route (that supports the horizontal sync rates of 15 kHz/24 kHz/31 kHz) unless, if you want to start dealing with Sega Model 2 arcade motherboards, Sega Naomi 1 & 2, Taito Type X and/or Type X+ or Sammy/Sega Atomiswave mobo setups..... ^_~

PC Engine Fan X! ^_~

neorichieb1971 · Post by **neorichieb1971** » Sun May 13, 2007 2:07 pm

Spitlips wrote:Ok, I did a bit of research and what you need is a monitor capable of handling a VGA (31khz) hi res signal.

So... besides jamma, I need a tri-sync monitor

Just to add, where the hell did you read that?

thegreathopper · Post by **thegreathopper** » Sun May 13, 2007 2:47 pm

Spitlips wrote:Ok, I did a bit of research and what you need is a monitor capable of handling a VGA (31khz) hi res signal.

So... besides jamma, I need a tri-sync monitor

Ibara only supports low res 15Khz, so no need for a hires cab unless you want to play Naomi games.

Spitlips · Post by **Spitlips** » Mon May 14, 2007 5:00 pm

I am one lousy researcher =)

I came to the conclusion that all games after the year 2000 was VGA games..

thanks guys for correcting me!