RGB modding a Magnavox 23MT2336/17
RGB modding a Magnavox 23MT2336/17
How would I go about modding something like this that has no service manual on the internet and has no modding guide.
Is this even a decent TV? It's a 2006 Magnavox. I'm sure it's no Trinitron but it was free on the side of the road so...
Any help would be appreciated.
Is this even a decent TV? It's a 2006 Magnavox. I'm sure it's no Trinitron but it was free on the side of the road so...
Any help would be appreciated.
Re: RGB modding a Magnavox 23MT2336/17
Open it up and see if there's a chassis model number. Might find a service manual for a different model that uses the same chassis. If that doesn't work, look for the ICs on the chassis and search their model numbers for datasheets.
2006 is fairly late-model for CRTs. Could be an integrated uC/Jungle which wouldn't be muxable.
2006 is fairly late-model for CRTs. Could be an integrated uC/Jungle which wouldn't be muxable.
Re: RGB modding a Magnavox 23MT2336/17
I found it!
https://www.manualslib.com/manual/20841 ... =11#manual
Is muxing a specific way to RGB mod so that you can still use OSD while in RGB mode? Are late CRTs like this one more desirable or less?
https://www.manualslib.com/manual/20841 ... =11#manual
Is muxing a specific way to RGB mod so that you can still use OSD while in RGB mode? Are late CRTs like this one more desirable or less?
Re: RGB modding a Magnavox 23MT2336/17
TMPA8859 jungle cannot be modded for RGB.
If the TV doesn’t have svideo and/or component they should be able to be added.
If the TV doesn’t have svideo and/or component they should be able to be added.
___________________________________________________
MarkOZLAD
OSD/External RGB Mux Diagram
OSD/External RGB Mux Resistor Value Table 0.7Vp-p : 0.5Vp-p
"Imagine toggle switch OSD modding a TV in 2019" - maxtherabbit
MarkOZLAD
OSD/External RGB Mux Diagram
OSD/External RGB Mux Resistor Value Table 0.7Vp-p : 0.5Vp-p
"Imagine toggle switch OSD modding a TV in 2019" - maxtherabbit
Re: RGB modding a Magnavox 23MT2336/17
It has component so I'll just stick with that until I can find something that's RGB modable, or just a nice Trinitron. (of course a pvm or bvm is the end goal)
Thanks for the help!
Thanks for the help!
Re: RGB modding a Magnavox 23MT2336/17
It isn't RGB moddable but that drawback is more or less nullified by the fact that is has factory component inputs. For sure a keeper.TetsuoXLI wrote:I found it!
https://www.manualslib.com/manual/20841 ... =11#manual
Are late CRTs like this one more desirable or less?
Re: RGB modding a Magnavox 23MT2336/17
Thanks for the information. By the way there is a website called PartStore that claims to have parts for this CRT (I was hoping to replace the housing)
Here's the link:
https://partstore.encompass.com/model/MAG23MT2336%7C17
Does this look legit to you? I talked to a representative who told me that the parts would be in stock soon and I could purchase them. This seems a little suspicious for a 15 year old TV.
Here's the link:
https://partstore.encompass.com/model/MAG23MT2336%7C17
Does this look legit to you? I talked to a representative who told me that the parts would be in stock soon and I could purchase them. This seems a little suspicious for a 15 year old TV.
Re: RGB modding a Magnavox 23MT2336/17
Must of what's available are just components like capacitors. Nothing specific to a CRT TV. The more obscure parts, like the Rear Cabinet Assembly, are listed as not available for backorder.
Re: RGB modding a Magnavox 23MT2336/17
Ok I see. The representative must have misunderstood when I asked them.
Thanks.
Thanks.
Re: RGB modding a Magnavox 23MT2336/17
Component video quality on Philips TVs is clean and perfect. There's absolutely no need to mod for RGB, just get a transcoder and you'll be good.
Re: RGB modding a Magnavox 23MT2336/17
Sounds good! Thanks.