Hey guys, sorry for resurrecting this thread but I have a problem with my Xbox 360.
My goal is to output 640x480 to my VGA monitor, but I cannot make it work. I'm using a HDMI to VGA adapter.
There are 2 scenarios, the first one is disabling the Display Detect. The console shows me the following resolutions:
https://i.ibb.co/RHbBm7y/Whats-App-Imag ... 6-AM-1.jpg
If I enable Display Detect, the console shows me the following resolutions:
https://i.ibb.co/px4HCT0/Whats-App-Imag ... -06-AM.jpg
First thing to notice is that I cannot see any option for 640x480, neither enabling DD or disabling it. One could guess that 480p is the equivalent resolution, but all the XXXp resolutions I use tend to force Widescreen option. Maybe that's not the case for 480P? Second thing to notice is that the "PC resolutions" include a weird 848x480 resolution, which is not 4:3.
Now the tests: I've tested both resolutions, 480p (both with DD enabled and disabled) and 848x480 and the results were the same, my monitor turning black and flickering on-and-off, showing the 360 output for some seconds and then going back to black. The monitor was flickering hard, to the point that I was not able to show the monitor OSD. I even was a bit afraid that the resolution sent to the monitor could damage it.
Obviously, my monitor supports 640x480, as I tested it with my PC.
Anyone experiencing this? Is the HDMI to VGA adapter the problem and I should buy a AV to VGA adapter? Is there any other system display setting that could make my monitor not get the input signal from the console correctly?
Any help would be appreciated!