Which Input Boards Support Anaolog RGB+Sync on BVM D Series?

DatPhosphorGlow · Post by **DatPhosphorGlow** » Sat Oct 10, 2015 3:56 am

I understand the BVM D series are backwards compatible with previous generation input boards, what are these part numbers?

Fudoh · Post by **Fudoh** » Sat Oct 10, 2015 10:36 am

none of the extension boards offer inputs for external sync.

Guspaz · Post by **Guspaz** » Sat Oct 10, 2015 11:13 pm

Fudoh wrote:none of the extension boards offer inputs for external sync.

What do you mean? The BKM-129X RGB/component board has input/output for external sync, and lists compatibility with the BVM-D9H/D14H series.

Source: http://www.broadcaststore.com/pdf/model ... manual.pdf

Ed Oscuro · Post by **Ed Oscuro** » Sun Oct 11, 2015 12:01 am

Those model numbers are strange and don't seem to correspond to what we normally consider the "usual" BVM-D series. I don't know where you'd find a PVM-D20L5, either.

Instead I'd look at the BVM-D series literature and check out the supported boards there. I don't think the BKM-129X is one of these, I'm pretty sure it doesn't work on the D20 for example (which is probably what a user would be interested in using it on).

Fudoh · Post by **Fudoh** » Sun Oct 11, 2015 11:00 am

the 129X is a low board (only 2/3 of the heigth of a 20/21D board), isn't it ? Won't fit a D20 monitor.

BazookaBen · Post by **BazookaBen** » Mon Oct 12, 2015 7:20 am

Fudoh wrote:the 129X is a low board (only 2/3 of the heigth of a 20/21D board), isn't it ? Won't fit a D20 monitor.

What about the size of the actual internal connector though, could it be the same? I feel like Sony wouldn't develop two separate connectors and protocols for two sizes of BVM.

I have a few BKM 129x's but no BVM's to test this on, and I would only be comfortable trying if I could find out the pinouts are the same.

Fudoh · Post by **Fudoh** » Mon Oct 12, 2015 9:02 am

no. Check some pictures on Google. Completely different. The small boards have one long connector, while the large boards have two shorter ones.

DatPhosphorGlow · Post by **DatPhosphorGlow** » Mon Oct 12, 2015 6:24 pm

I didn't realize there are different heights for the boards.

I actually have a 14" D series, not a 20".

So, which boards can I use for analog RGB input +Sync?

I believe mine was shipped with a 129X, is that the same board that's used in the non-D series 14" BVM?

BazookaBen · Post by **BazookaBen** » Mon Oct 12, 2015 6:32 pm

According to the manual:

http://www.broadcaststore.com/pdf/model ... manual.pdf

BKM 129x is works with BVM D9H and D14H tubes.

I have some for sale if you're interested.

shmups.system11.org

Which Input Boards Support Anaolog RGB+Sync on BVM D Series?

Which Input Boards Support Anaolog RGB+Sync on BVM D Series?

Re: Which Input Boards Support Anaolog RGB+Sync on BVM D Ser

Re: Which Input Boards Support Anaolog RGB+Sync on BVM D Ser

Re: Which Input Boards Support Anaolog RGB+Sync on BVM D Ser

Re: Which Input Boards Support Anaolog RGB+Sync on BVM D Ser

Re: Which Input Boards Support Anaolog RGB+Sync on BVM D Ser

Re: Which Input Boards Support Anaolog RGB+Sync on BVM D Ser

Re: Which Input Boards Support Anaolog RGB+Sync on BVM D Ser

Re: Which Input Boards Support Anaolog RGB+Sync on BVM D Ser