Ceatec Japan 2015

The place for all discussion on gaming hardware
Post Reply
User avatar
Fudoh
Posts: 13045
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Ceatec Japan 2015

Post by Fudoh »

starting tomorrow (October 7). Two new products from Micomsoft. Probably some crappy stuff nobody needs, but we'll see.....
User avatar
RGB32E
Posts: 1400
Joined: Thu Nov 05, 2009 12:50 am

Re: Ceatec Japan 2015

Post by RGB32E »

http://www.micomsoft.co.jp/ceatec2015.htm :mrgreen:
Micomsoft wrote:The black and square guy Renewal reprint!

Image

● limited reprint is renewed the old products is a growing demand from at the high number! Details will be announced at the venue.
※ Tip, is square product is darker.
Last edited by RGB32E on Tue Dec 08, 2015 5:38 pm, edited 2 times in total.
juji82
Posts: 349
Joined: Sat Nov 16, 2013 3:05 am
Location: Tokyo, Japan

Re: Ceatec Japan 2015

Post by juji82 »

using my crappy japanese comprehension, they say they will reprint some older products, probably SELECTY21 (if they found scart connectors) or xselect-d4 I believe...
they will showcase XDAC-1plus and another product
User avatar
Xyga
Posts: 7181
Joined: Tue Nov 05, 2013 8:22 pm
Location: block

Re: Ceatec Japan 2015

Post by Xyga »

A whole cargo of DISPL v2 :P
Strikers1945guy wrote:"Do we....eat chicken balls?!"
User avatar
RGB32E
Posts: 1400
Joined: Thu Nov 05, 2009 12:50 am

Re: Ceatec Japan 2015

Post by RGB32E »

https://twitter.com/MicomsoftX

Micomsoft has been using twitter for updates. Yes, it's official, the SELECTY21 is going back into production AND they're producing a direct cable for use with the XRGB-mini! The 8MDIN pins are thicker as well. I'm glad to see a DB15 (FM Towns) to 8MDIN (XRGB-mini) cable as opposed to DB15 to RGB21, as it reduces the number of connections and potential signal loss and noise! :mrgreen:

Image
Some interesting looking cables connected to the SELECTY21!

Image
New cable on the left features thicker pins for a more reliable connection.

Image
Overview of Ceatec 2015 booth. SFC, Saturn, and PlayStation all connected through a new production SELECTY21 with new DB15 to 8MDIN cable!

Looks like the new SELECTY21 to XRGB-mini cable is much more substantial than what was included with the SELECTY21 before:
Image
kamiboy
Posts: 2000
Joined: Sat Sep 04, 2010 4:40 pm
Location: Denmark

Re: Ceatec Japan 2015

Post by kamiboy »

What the duck? You mean it no longer comes with a JP21 output cable? So that would make it only geared towards people who want to connect three devices to a mini, rather than a general JP21 switch as it was before.

Cool for mini owners, I guess, but sucks for us with lots of JP21 devices they want to connect to an actual CRT. Now we have to somehow build a DB15 to SCART cable. DB15 cables are not easy to source.
User avatar
RGB32E
Posts: 1400
Joined: Thu Nov 05, 2009 12:50 am

Re: Ceatec Japan 2015

Post by RGB32E »

The DB15-RGB21 cable that was previously included doesn't look like one you'd even want to use! I'd imagine they will have DB15-RGB21 cables available as well, but it wasn't the focus of the demo. Are DB15 connectors actually scarce in Europe?! Very easy to find in the states. :?

Image
User avatar
jandrogo
Posts: 275
Joined: Thu Feb 07, 2008 11:51 pm
Location: Spain

Re: Ceatec Japan 2015

Post by jandrogo »

An XRGB4 with 4K support to allow more detailed scanline shadows would had been amazing... Maybe next year?
Working in the japanese language achievement
amaradona
Posts: 121
Joined: Thu Apr 18, 2013 5:11 pm
Location: London

Re: Ceatec Japan 2015

Post by amaradona »

I was hoping a new device with more inputs and with an autoswitch.
kamiboy
Posts: 2000
Joined: Sat Sep 04, 2010 4:40 pm
Location: Denmark

Re: Ceatec Japan 2015

Post by kamiboy »

Yeah, four inputs would have been nice.
juji82
Posts: 349
Joined: Sat Nov 16, 2013 3:05 am
Location: Tokyo, Japan

Re: Ceatec Japan 2015

Post by juji82 »

i knew it :D
User avatar
Fudoh
Posts: 13045
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: Ceatec Japan 2015

Post by Fudoh »

The package will include both cables, DB15 to JP21 and DB15 to MiniDin.
kamiboy
Posts: 2000
Joined: Sat Sep 04, 2010 4:40 pm
Location: Denmark

Re: Ceatec Japan 2015

Post by kamiboy »

Nice. Anyone know what level these will be priced at? I seem to vaguely recall the original price of a SELECTY being around 8000¥
User avatar
Fudoh
Posts: 13045
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: Ceatec Japan 2015

Post by Fudoh »

Higher than before. 11.000 maybe ?
User avatar
RGB32E
Posts: 1400
Joined: Thu Nov 05, 2009 12:50 am

Re: Ceatec Japan 2015

Post by RGB32E »

Fudoh wrote:Higher than before. 11.000 maybe ?
That is an absurdly high price for a passive switcher!!! It states the original price on Micomsoft's product page - 7,800円, which converts to about $65 US. 7,800円 to 11,000円 would be a giant price hike Fudoh!!!

http://micomsoft.co.jp/selecty21.htm
User avatar
Fudoh
Posts: 13045
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: Ceatec Japan 2015

Post by Fudoh »

hey, just passing on what I heard. I'm sure the page will be updated within the next few days and we'll see. Rigth now that's the original product page from years ago.
User avatar
RGB32E
Posts: 1400
Joined: Thu Nov 05, 2009 12:50 am

Re: Ceatec Japan 2015

Post by RGB32E »

Fudoh wrote:hey, just passing on what I heard.
Yeah, I figured as much... :evil: Perhaps you can let them know that a 40% price jump is a bit much!
kamiboy
Posts: 2000
Joined: Sat Sep 04, 2010 4:40 pm
Location: Denmark

Re: Ceatec Japan 2015

Post by kamiboy »

If they had just included an extra input then the price increase would have been more than justified. Three is just bizarrely inadequate.
xamievilx
Posts: 5
Joined: Mon Aug 03, 2015 12:17 am

Re: Ceatec Japan 2015

Post by xamievilx »

Has there been any updates on the Selecty21 front?
User avatar
Fudoh
Posts: 13045
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: Ceatec Japan 2015

Post by Fudoh »

should be available in early december.
User avatar
RGB32E
Posts: 1400
Joined: Thu Nov 05, 2009 12:50 am

Re: Ceatec Japan 2015

Post by RGB32E »

Looks like there are some new products/releases up for pre-order on Amazon.co.jp!

SELECTY21 N (¥13,800; 12/25/2015)
RGB21 Cable for Super Famicom (¥5,940; 12/12/2015)
RGB21 Cable for Sega Saturn (¥5,940; 12/12/2015)
RGB21 Cable for Super Famicom (¥5,940; 12/12/2015)

These cables look really promising and could very well be the new de facto RGB21 cables!
This 21-pin RGB cable makes high-quality video output from the PlayStation/Saturn/SFC possible.
• SCE PlayStation genuine "RGB cable SCPH-1050" is equivalent.
• SEGA Sega Saturn genuine "RGB cable HSS-0109" is equivalent.
• Nintendo SNES genuine "RGB cable SHVC-010" is the equivalent.
• The cable uses Panasonic capacitors for more stable video output. (PlayStation & SFC only)
• Fully shielded cable to eliminate audio and video noise.
• This cable is intended for use with Microcomputer Software, Inc. up-scalers, such as the "Frame Meister N DP3913547", or "XRGB-3 DP3913418". (There are cases where this cable can be used on CRTs with RGB inputs)
※ Analog RGB with a display that corresponds to the horizontal sync frequency 15kHz is required. Adapters can be used to convert the 21-pin RGB plug to a connector suitable for your display/application
• Cable length: 2.0m
User avatar
Fudoh
Posts: 13045
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: Ceatec Japan 2015

Post by Fudoh »

Cables will be available from Solaris next week (afaik ¥3,500 a pop and with a little discount when ordered together). The SELECTY21 a week after that. No confirmation on the final price yet. ¥13,800 is steep.
User avatar
Guspaz
Posts: 3242
Joined: Tue Oct 06, 2015 7:37 pm
Location: Montréal, Canada

Re: Ceatec Japan 2015

Post by Guspaz »

I don't get why SCART switches are so expensive and complicated. Can you not just solder a bunch of SCART sockets to a PCB, run traces from the pins to pads, and then have a mechanism with spring contacts that moves between shorting different sets of pads?
Zapf
Posts: 366
Joined: Sat Aug 08, 2009 5:21 pm

Re: Ceatec Japan 2015

Post by Zapf »

Its an incredibly niche product at this point. also, japan
User avatar
Xyga
Posts: 7181
Joined: Tue Nov 05, 2013 8:22 pm
Location: block

Re: Ceatec Japan 2015

Post by Xyga »

Guspaz wrote:I don't get why SCART switches are so expensive and complicated. Can you not just solder a bunch of SCART sockets to a PCB, run traces from the pins to pads, and then have a mechanism with spring contacts that moves between shorting different sets of pads?
1) 21 loose pins each carrying its own thing
2) multiply by X
3) throw a monster metallic mechanical switch in
3) = ever heard of Murphy's law ?

I've heard only Swiss-made mechanical scart switches don't fail, expert-crafted, all military-grade parts, diamonds and gold.
Just a bit expensive. :D
Strikers1945guy wrote:"Do we....eat chicken balls?!"
User avatar
RGB32E
Posts: 1400
Joined: Thu Nov 05, 2009 12:50 am

Re: Ceatec Japan 2015

Post by RGB32E »

jugu wrote:Received an email from Solaris offering 3 new pro-quality cables for:
PlayStation https://solarisjapan.com/collections/pr ... laystation

Super Famicom - https://solarisjapan.com/products/pro-r ... er-famicom

Saturn - https://solarisjapan.com/products/pro-r ... ega-saturn

PlayStation - https://solarisjapan.com/products/pro-r ... laystation

$30 USD seems a bit much to me.

On paper, do these look superior to cables from Retro Gaming Cables?

Apologies if this has already been discussed before. Looked new to me.
When you consider the price of similar multi-coax cables from RGC/RCA, it's actually less expensive at $30 (less if bundled) for these factory manufactured cables. These are not to be confused with the standard cables the eBay sellers offer that cost nearly as much that give OK results or the dirt cheap ones that pop up on sites such as Play-Asia that yield poor results. They have the advantage of being professionally manufactured and are designed to be superior to the official RGB21 cables sold by Nintendo, Sega and Sony. Should be interesting to see feedback for these cables!
xamievilx
Posts: 5
Joined: Mon Aug 03, 2015 12:17 am

Re: Ceatec Japan 2015

Post by xamievilx »

any word yet on when the Selecty21 will be showing up on Solaris?
User avatar
Fudoh
Posts: 13045
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: Ceatec Japan 2015

Post by Fudoh »

stock should be in tomorrow.
Post Reply