RTC2200 psu ?

akumajo · Post by **akumajo** » Thu Jul 16, 2015 12:18 pm

Hi

Just received this today (bought for $60) but without PSU (surprise, It was shipped with a (free) HDFury 2, hdmi cable, HDFury PSU and 2x hdfury USB cables so I will not complain ...).

Anyone know the specs of the official RTC2200 PSU ?

Thanks

Fudoh · Post by **Fudoh** » Thu Jul 16, 2015 1:33 pm

9V at 500mA. My multimeter is out battery right now, but I'm pretty sure that the front tip is positive. Got a stupid connector though (like a headphone jack).

Manual for internal jumper settings if you need them: https://www.sendspace.com/file/6icubi

akumajo · Post by **akumajo** » Thu Jul 16, 2015 1:51 pm

ok thanks Fudoh

so a 3.5mm connector should be fine right ? (with 9v, 500mA or more).

Fudoh · Post by **Fudoh** » Thu Jul 16, 2015 2:01 pm

Fudoh · Post by **Fudoh** » Thu Jul 16, 2015 2:02 pm

Can I ask what you're using the CS for ? I find less and less use for component to RGBHV transcoding these days.

akumajo · Post by **akumajo** » Thu Jul 16, 2015 2:21 pm

just testing a different setup

BazookaBen · Post by **BazookaBen** » Fri Jul 17, 2015 5:54 am

I use mine to play 6th gen games PC CRT's. Also Wii U, since you can't get full-range RGB over HDMI.

akumajo · Post by **akumajo** » Sat Jul 18, 2015 10:45 am

Ok,I received the psu.

Current test setup :
XSELECT-D4 (D-Terminal Out) > RTC2200
edit : same result with PS2 > RTC2200 (hard to see anything...)

i have a very weak signal, hard to see the xselect OSD (should be white but it's blue color)

any idea? bad psu ? defective rtc2200?

BazookaBen · Post by **BazookaBen** » Sat Jul 18, 2015 3:26 pm

The RTC2200 has a few pots on the side you can turn with a small flathead. Find the manual online and give them a turn.

akumajo · Post by **akumajo** » Sat Jul 18, 2015 3:30 pm

yeah, already done that
still no love

Fudoh · Post by **Fudoh** » Sat Jul 18, 2015 5:56 pm

The XSELECT's output is not exactly standard. It's running through an equalizer that allows you to tweak the gain for all signal parts. Did you try the RTC with a signal directly from a console ? Or did you try to increase the gain on the XSELECT's output ?

akumajo · Post by **akumajo** » Sat Jul 18, 2015 6:46 pm

tested with ps2 and wii
Screen is black and I can hardly see anything.

PSU is 9v 1000mA with jack 3,5mm

akumajo · Post by **akumajo** » Sun Jul 19, 2015 7:19 am

did another test with the vga passthrough input, same result

https://drive.google.com/open?id=0BxvnD ... FZxRHJLYzQ
https://drive.google.com/open?id=0BxvnD ... lFxTFlPZnc
https://drive.google.com/open?id=0BxvnD ... mZkT2k3TzQ

tested different jumper configuration, no luck

Fudoh · Post by **Fudoh** » Sun Jul 19, 2015 9:26 am

If you got access to a multimeter, you could check if the two voltage converters on the board give you the correct output voltage readings.

akumajo · Post by **akumajo** » Sun Jul 19, 2015 7:51 pm

Fudoh wrote:If you got access to a multimeter, you could check if the two voltage converters on the board give you the correct output voltage readings.

checked with both polarity :
8,26 and -0,64

akumajo · Post by **akumajo** » Tue Jul 28, 2015 10:45 am

ok, i'm giving up on this
always black screen and tested with many different consoles
someone want it cheap ? contact me

BazookaBen · Post by **BazookaBen** » Tue Jul 28, 2015 9:16 pm

Did you ever try using it with a different display?

Like, try running a 720p signal from a PS3 into a computer monitor or another TV with VGA in.

akumajo · Post by **akumajo** » Wed Jul 29, 2015 5:02 am

yup, on my projector and lcd
I'm giving up seriously

.

shmups.system11.org

RTC2200 psu ?

RTC2200 psu ?

Re: RTC2200 psu ?

Re: RTC2200 psu ?

Re: RTC2200 psu ?

Re: RTC2200 psu ?

Re: RTC2200 psu ?

Re: RTC2200 psu ?

Re: RTC2200 psu ?

Re: RTC2200 psu ?

Re: RTC2200 psu ?

Re: RTC2200 psu ?

Re: RTC2200 psu ?

Re: RTC2200 psu ?

Re: RTC2200 psu ?

Re: RTC2200 psu ?

Re: RTC2200 psu ?

Re: RTC2200 psu ?

Re: RTC2200 psu ?