I'd appreciate help with this. I'm trying to run a JAMMA board in an MVS multi-slot cabinet. I have the adapter made with audio disconnected.
Is there a way I can wire up the audio so that the JAMMA board outputs sound to one or preferably both of the MVS cabinet's speakers?
Please don't link to places where I can buy adapters. I have my own adapter almost complete.
JAMMA to MVS cabinet adapter
-
NoAffinity
- Posts: 1081
- Joined: Mon May 07, 2018 5:27 pm
- Location: Escondido, CA, USA
Re: JAMMA to MVS cabinet adapter
Run speaker + and speaker - in parallel from jamma board to respective terminals on both speakers.
Not knowing your setup, this might be the easiest solution:
You can just take one wire back to jamma board sp +, and piggyback from one + speaker terminal to the other + speaker terminal with a jumper wire of your own making. Same for - to -.
Sent from my SM-G955U using Tapatalk
Not knowing your setup, this might be the easiest solution:
You can just take one wire back to jamma board sp +, and piggyback from one + speaker terminal to the other + speaker terminal with a jumper wire of your own making. Same for - to -.
Sent from my SM-G955U using Tapatalk