Hi all. Ive owned an BVM 20E1E for some time now. It has two card outputs. One with RGB and Sync and the other with RGB and some other ports?
Ive successfully connected a mame pc to the RGB and sync ports using a bnc to vga cable.
I Merged the white and black cable into one and plugged it into the sync port of the bvm. People on other forums said this wasn't necessary but when i tried to use either the black or white cable only the picture would roll either vertically or horizontally?
Ive successfully attached an Amiga 500 to the card without a sync via Amiga rgb video out to scart and then scart to bnc. This, however, does not work on My A1200s or spectrum 128? I do not know why?
I brought an Extron 4 way splitter recently and a 5 bnc cable The picture comes through from the extron but its rolling. Changing sync from ext to int on the bvm doesn't help but at least an image is coming through so i know the switcher is working.
The switch box on the back as rgb hv and v outputs.
Im quite the novice when it comes to something as technically in depth as the Sony BVM so any advice on how to hook this all up for the best results (or any results) by someone who knows what their talking about would be greatly appreciated.
Thanks
P.s. I can provide images or video on YT if needed.