Hello all!
im looking for info about the Region Settings for Dogyuun,i know how it works for Out Zone for example,and i want know if is possible do the same with Dogyuun or maybe this PCB needs replace some Eprom info...
thanks in advance!
cheers.
Dogyuun PCB Region
-
Emerald golvellius
- Posts: 4
- Joined: Fri May 13, 2016 10:56 pm
- Location: Spain
- Contact:
Dogyuun PCB Region
Alestes metamorphoses into an Owl,the time to Fight has come.
Re: Dogyuun PCB Region
Heya!
You've probably solved this by now but for future reference you can change Dogyuun to any region version by simply adjusting a couple of jumpers. Just did this today after reading a similar topic about Truxton 2. If you add jumpers to all four jumper points (JP1-4) next to the dip switches your game is now magically Japanese. You get the nice intro and ending sequence as well as some new weapon features. A must adjustment if you ask me. I used clipped-off capacitor leads to connect them.
Here's an image for clarification.
https://photos.app.goo.gl/rdo6vSBgH4NwZGT69
Björn
You've probably solved this by now but for future reference you can change Dogyuun to any region version by simply adjusting a couple of jumpers. Just did this today after reading a similar topic about Truxton 2. If you add jumpers to all four jumper points (JP1-4) next to the dip switches your game is now magically Japanese. You get the nice intro and ending sequence as well as some new weapon features. A must adjustment if you ask me. I used clipped-off capacitor leads to connect them.
Here's an image for clarification.
https://photos.app.goo.gl/rdo6vSBgH4NwZGT69
Björn
Last edited by safaex on Sat Jan 25, 2025 12:34 am, edited 2 times in total.