Hi,
i got two PVMs online and the seller packed them very poorly - so one is dead (broken frame and not turning on)
The other one is running - but has an issue. From time to time the picture flickers up bright blue. I hope this is some kind of dead cap issue that i can fix and someone here
can help me out with (i already switched the power circuits from the two machines - and the error stays the same - so i would say its nots not on the power circuit)
if its a bigger problem caused by the poorly transportation i will sell them for parts...
If my description is not good enough i could try to film it..
rgds dario
Sony 14M4E Problems
-
xAzurexEonx
- Posts: 74
- Joined: Sun Aug 27, 2017 2:45 am
Re: Sony 14M4E Problems
It could be anything really.
A cable could of come loose. Solder joints could have cracked. A board could of been cracked, etc etc.
All of which are an easy fix. You'll have to search inside for the problem.
A cable could of come loose. Solder joints could have cracked. A board could of been cracked, etc etc.
All of which are an easy fix. You'll have to search inside for the problem.