Problem with extron super emotia

[DAVI22]

Hi, I've got a model super Emotia for use with a classic xbox to play 240p and have longer correct SCART BNC cable, the Xbox is connected by vga with neoya to 480p (I have a super Emotia model gx and it works perfect) in the super model Emotia to start the LED remains fixed at 4 and do not understand why or maybe the appliance or any track circuitry this evil because we have open and seems to have tried to repair the inside ... . would have to turn on the LED 3 and then the signal is 480p .... you know what can happen or how it could be repaired? thank you very much




I do not understand because the resolution of the console is correct and does not correspond with what makes the LED 4 Emotia, and therefore no display of image

[DAVI22]

Any ideas? Not even know where to start

[Josh128]

With the video signal applied to the Emotia, unplug the Emotia power and then plug it back and see if it syncs up. I used to have an SE that required this. After that it would recognize any res you sent to it-- but it would require this method every time you turned it on.

[DAVI22]

Thanks, that he had already tried and does not work .. do not know what can happen