SHMUPPERS I need your help - Arcade Graphics

[nlen83-2]

As some know, I am working on a dream project building a dedicated SHMUP arcade cab. The cab is a Dynamo hs-27 I believe and I am to the point of needing to get some arcade quality graphics printed. I am making the graphics myself but really need a good lead to someone that might be able to print them. I have had no luck so far with game grafix (I believe that is the name). Specifically right now I need to get my control panel overlay printed. My main concern is that the original (it was soul calibur 2) was a nice thin plastic like adhesive for the cpo under 1/16" plexiglass. I'd like to do the same and hopefully something of similar quality. (I already have a new piece of plexiglass) Anyways, tips, pointers, direction is all appreciated. (I had an older project printed at a local graphics shop and it really didn't come out quite as I'd hoped ...it all had a very glossy finish and is now showing stuck pressure points behind the plexiglass)

[Specineff]

I *May* know someone who can do that job. I'll report back within 24 hours.

[nlen83-2]

Truly appreciated...I have been working months on this. I cannot wait to get it done.

[Specineff]

PM'd you.