Extron Super Emotia GX Component output

[rlaidepeas]

Hello, I have an Emotia GX that is supposed to be able to output RGBS and Component Video through the BNC connectors. There is a push button that switches RGB or Component, but I just need to know what type of BNC connectors I need to plug into the Emotia to output to my Sony Trinitron's Component input.

[Fudoh]

You just need three BNC RCA adapter plugs like the one shown below. After that you can use standard RCA to RCA component cables.

[rlaidepeas]

Thanks so much for the quick reply! Also would I want to only use the R-Y, Y, and B-Y outputs and ignore the S (sync) since it's only used for RGB?

[Thamiel]

Yep. Sync is on the green cable.

[rlaidepeas]

Thanks Thamiel.

Fudoh - the bnc to rca example you showed me would be BNC Male to RCA Female, correct? Something like this?

http://www.monoprice.com/Product?c_id=1 ... 1&format=2

Would something like this work just as well?

http://www.amazon.com/Steren-254-712IV- ... +component

[Fudoh]

sure, that's fine as well.

[rlaidepeas]

If I want to run Mame from my laptop to my Emotia to display on my TV, will I need to adjust my graphics resolution in display settings? I'm wondering if I should be using 640x480 resolution in Windows, and if so, what color depth would I select? - 256, High Color (16 bit) or True Color (32 bit) ?

[Fudoh]

yes, 480p in true color will be your choice. In MAME choose DirectDraw instead of D3D processing to get proper linedoubling.