Micomsoft SC-512N1 and Portable XCAPTURE-1 Both 1080p60

The place for all discussion on gaming hardware
Post Reply
Plasia
Posts: 51
Joined: Fri Nov 18, 2011 3:00 pm

Micomsoft SC-512N1 and Portable XCAPTURE-1 Both 1080p60

Post by Plasia »

Didn't see a thread about these, powered by google translate

SC-512N1:
Component HD & DVI
Capture board

Analog RGB video composite video, S-video, component video, DVI-D (HDMI compatible), of 15kHz ~ 31kHz, and for download to your computer voice, SC-512N1-L/DVI is a capture board.

■ Supports PCI Express slot low-profile specification.

■ capture of 1080p (60p) can also "× 1" slot so Gen2 support PCI Express.

■ (also removable) standard through output board for those of feelings. Games (you can play the game for preview screen at the time of capture is also low latency) comfortable play in conjunction with TV low-latency.

■ reducing the CPU load during recording by corresponding Intel Corporation Quick Sync Video.

■ Support to capture analog RGB, Component, DVI-D, video (composite), S-Video.

■ You can input HDMI signal from DVI terminal if you use a DVI-HDMI conversion adapter included.

■ Low-profile bracket included.

■ if I remove the board through output, can also be used in one slot.


XCAPTURE-1
USB3.0 only
HD Capture unit

Is a device that capture (or still images recorded on video) to an image on a PC (X Capture One) XCAPTURE-1.

■ to support USB3.0 (USB3.0 only). In high-speed data transfer, can capture the (60p) 1080p.

■ Because it can be connected to a PC with a cable of USB3.0, you can also connect to your laptop.

■ Support to capture analog RGB, Component, HDMI, video (composite), S-Video.

■ It is shipped with a through output terminal for those feelings. Game play is comfortable in combination with TV low-latency.

■ can be bus-powered operation in USB3.0 (900mA).

■ By corresponding to the intel Quick Sync Video, and reduce the CPU load of the recording in H.264 format.


Discuss!
Post Reply