Help identify an A/V cable (solved)

The place for all discussion on gaming hardware
Post Reply
iammud
Posts: 28
Joined: Sat Jun 25, 2011 1:41 am

Help identify an A/V cable (solved)

Post by iammud »

I'm cleaning out my box extra AV cables and I found one that I can't figure out what it goes to. Anyone know what it is? It looks like Genesis, but has a notch on top, and 3 pins. This is as clean of a pic as I can get, but it'll at least give you an idea of the shape and pin locations.
Image
Last edited by iammud on Thu Mar 08, 2012 1:37 am, edited 1 time in total.
User avatar
RGB32E
Posts: 1400
Joined: Thu Nov 05, 2009 12:50 am

Re: Help identify an A/V cable

Post by RGB32E »

Sega Saturn Composite AV cable.
iammud
Posts: 28
Joined: Sat Jun 25, 2011 1:41 am

Re: Help identify an A/V cable

Post by iammud »

DOH! I should have realized. That's the one system I didn't check the port on. Thanks
iammud
Posts: 28
Joined: Sat Jun 25, 2011 1:41 am

Re: Help identify an A/V cable

Post by iammud »

Any idea why this one has so many more pins?

Image
User avatar
ApolloBoy
Posts: 938
Joined: Sat Jan 28, 2012 7:17 pm

Re: Help identify an A/V cable

Post by ApolloBoy »

iammud wrote:Any idea why this one has so many more pins?

Image
Some Saturn AV cables have all the pins present, some only the necessary pins like the first one you posted.
User avatar
Ed Oscuro
Posts: 18654
Joined: Thu Dec 08, 2005 4:13 pm
Location: uoıʇɐɹnƃıɟuoɔ ɯǝʇsʎs

Re: Help identify an A/V cable

Post by Ed Oscuro »

iammud wrote:This is as clean of a pic as I can get
You're trying to focus too close - pull the camera back from the subject and it will get sharper (though less magnified, of course).
User avatar
Vyxx
Banned User
Posts: 1020
Joined: Wed Jul 01, 2009 1:13 pm
Location: Ontario, Canada

Re: Help identify an A/V cable

Post by Vyxx »

Ed Oscuro wrote:
iammud wrote:This is as clean of a pic as I can get
You're trying to focus too close - pull the camera back from the subject and it will get sharper (though less magnified, of course).
Or use the macro setting.
Post Reply