Hi everyone,
I was wondering if other Strato Fighter owners are having the same issue that I found on both of my Strato Fighter PCBs. It's like a sparkling effect more visible in the top of the screen. I did some research and found this...
http://www.system11.org/temp/PCB_repairs.html
" Also noticed sparklies on the backgrounds at the top of the screen - this came down to one incorrect RAM on the video board, -12 instead of -10. Switching sockets with one of the -10s was enough to clear the problem up."
Didn't try it yet but I would like to know if other people are having the same issue. And yes PCBs were tested on different setups with the same results.
Thanks,
\o/.k.