Blast City VGA cable

[johnwoo14]

While I probably solved the problem with the CP, I have another issue with my blast city. I'd like to try connecting my atomiswave board via 31khz but I don't have any 15pin vga connector in my cab so, do I simply need to connect a normal pc vga monitor cable to cab? If so, where do I find the connector in the cab? Back inside the hatch directly to the monitor?

Thanks for help, I'm totally noob

[fagin]

Wouldn't you connect it to a JAMMA finger board to connect to your JAMMA loom?!

[johnwoo14]

I don't know if I've correctly understood your answer but... Yes the board is connected to the jamma loom but both the board and the cabinet are vga enabled, I just don't know what I exactly have to do to connect each other to

[fagin]

VGA DSUB15 connector located on the monitor chassis. VGA lead direct connect from the motherboard.

[johnwoo14]

So... do I simply have to connect a normal pc vga cable frome the motherboard of the cabinet to the atomiswave board?

[fagin]

Sorry... when I said motherboard I meant the Atomiswave to monitor chassis.