Xbox to Jamma Convertor

[wild_eyed]

hi there. i've been looking for a solutions to my problem for the past few days perhaps someone here could help me.

my monitor is a wells gardner 19k7601

my images are displaying white fuzz. but the games are displaying decetntly

,

on the monitor there are four places were the sync pin could go.
previous games send it to -H sync on the monitor

im sending it there now for the xbox as well

but there are also +H sync -Vsync +vsync that go unused.

the pins on the monitor are as follows

1 Red
2 Green
3 Blue
4 Ground 1
5 +V Sync
6 +H Sync

7 Ground 2
8 -V Sync
9 -H Sync

wires from the jamma are:

Red
Green
Blue
Ground
Sync

Wires are running as follows:

Jamma Monitor
Red ----------- Red
Blue ----------- Blue
Green ---------- Green
Ground --------- Ground 1
+V Sync
+H Sync
Ground
Sync ----------- -VSync
-HSync

any help greatlu appreciated

[ericdesouza]

Follow the link for solution.
//http://www.arcademvs.com/VIDEO_ACCESSORIES.htm//
on the jamma connector there are 5 pins relating to the video
Red, Green, Blue, Ground, and Sync.
Tie the sync in with the last 2 pins H and V sync, thats how I had to do it with soft 15 and a break out cable on my wellsgardner

[wild_eyed]

cool, what refresh rate are you running on the xbox? beacuse i've tried connecting to the last two pins. and the image stays the same......