SNES Controller Region Lock-out Fix help....

[spadgy]

Anybody done this mod?

http://www.gamesx.com/misctech/eurosnescontrol.htm

On the picture 'Left side, after jumpers', I'm not 100% confident that I can see where the yellow wire is soldered on.

Is it to the two points immediately above where the red wire is soldered, or does the yellow wire in fact connect to the soldering point in the top right of the picture?

Thanks

[Hewitson]

The yellow wire goes on the 2 points directly above the red. Its easy to tell because his soldering is so bad

[spadgy]

Thanks for that. I'm glad to be sure before diving in.