Well i just about worked all the kinks running my new 4 slot MVS with my MRoss SG.
1. Stereo mode works perfect with MVS (switch on back, tested L,R, and Center with no problem)
2. No test switch (will use dips, no big deal)
3. Button input (now in the manual it says its wired for 4 button MVS, ok-But when i push the C button on my Neo Stick(new kidney shape one) it registers both C and D on the input test menu. If i push D button, C will register too at the same time. What the hell. I plugged directly to the ports on the 4 slot board and no problem.
Is this a wiring issue with the SG? All you doing really is adding the extra button wire from the Jamma harness as it the same position as the MVS pinout. As a note it does this also on the 2P port on the SG as well. So im clueless at this point, any help would be appreciated
Weird Supergun button problem
Weird Supergun button problem
Iron Maiden: "It was dead, but alive at the same time."