New Sync Strike - Available Now!
Re: New Sync Strike - Available Now!
Did someone on this thread figure out the whole 15khz via the RGBHV inputs on the Edge and didn't tell me? I get asked about that from time to time.
I just ordered a sync strike to play with myself, but I got this rather unfriendly error after checkout
Money has gone from my Paypal though so I guess it's ok.
I just ordered a sync strike to play with myself, but I got this rather unfriendly error after checkout
Money has gone from my Paypal though so I guess it's ok.
OSSC Forums - http://www.videogameperfection.com/forums
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Re: New Sync Strike - Available Now!
Come again Sir?!BuckoA51 wrote:Did someone on this thread figure out the whole 15khz via the RGBHV inputs on the Edge and didn't tell me? I get asked about that from time to time.
Re: New Sync Strike - Available Now!
The whole connecting 15khz sources to the edge using the RGBHV inputs rather than the RGBc thing, from reading back through this thread it seems some progress was made with getting that working reliably, possibly using the Extron too?
OSSC Forums - http://www.videogameperfection.com/forums
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Re: New Sync Strike - Available Now!
sorry Im in a rush, is this a sync stripper. and could be used in place of a LM1881
Re: New Sync Strike - Available Now!
Yes, it is actually based on the LM1881 as far as I know.
OSSC Forums - http://www.videogameperfection.com/forums
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Re: New Sync Strike - Available Now!
To bring this whole thing back to life!
Below is a screen capture of connection to the EDGE via PS2 -> Sync Strike -> EDGE via RGBH
Below is a screen capture of connection to the EDGE via PS2 -> SCART to RCA -> EDGE via RGBs
The difference is subtle but obvious imo.... look at the word WEAPON between both captures. The RGBH connection is certainly sharper. Also look at the "I" on CREDIT... less ringing by the looks of it.
It's more obvious seeing the output in "real life".
Below is a screen capture of connection to the EDGE via PS2 -> Sync Strike -> EDGE via RGBH
Below is a screen capture of connection to the EDGE via PS2 -> SCART to RCA -> EDGE via RGBs
The difference is subtle but obvious imo.... look at the word WEAPON between both captures. The RGBH connection is certainly sharper. Also look at the "I" on CREDIT... less ringing by the looks of it.
It's more obvious seeing the output in "real life".
Re: New Sync Strike - Available Now!
Yeah its definitely better, I need to document this on my site, I'll run some tests of my own when my Sync Strike arrives. So you've just got the sync strike in the chain between the Edge and the PS2, no Extron or anything like that?
OSSC Forums - http://www.videogameperfection.com/forums
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Re: New Sync Strike - Available Now!
Be sure to test Master System dropouts with the Gefen Scaler Plus.
Re: New Sync Strike - Available Now!
Hey, just fixed that.BuckoA51 wrote: I just ordered a sync strike to play with myself, but I got this rather unfriendly error after checkout
Money has gone from my Paypal though so I guess it's ok.
-
ceramiclion
- Posts: 55
- Joined: Thu Dec 22, 2011 11:39 pm
Re: New Sync Strike - Available Now!
Well I got mines today. Was very happy with the shipping speed and then tried it on my faroudja NR series and got nothing. Just black not even a static. It does have soun so I know the unit works. I need some help here. Thanks
UPDATE
Tried hooking it up using the RGB+ sync leads. Now I get a picture but is all scrambled. I just about had with that faroudja NR. I tried hooking my SNES using the scart to YUV convertor to it and I would get a shake whenever the screen had white on it now I tried to use the sync striker and it still no good.
Unless I can find a comprehensive way to fix, the faroudja will find a new home.
UPDATE
Tried hooking it up using the RGB+ sync leads. Now I get a picture but is all scrambled. I just about had with that faroudja NR. I tried hooking my SNES using the scart to YUV convertor to it and I would get a shake whenever the screen had white on it now I tried to use the sync striker and it still no good.
Unless I can find a comprehensive way to fix, the faroudja will find a new home.
Re: New Sync Strike - Available Now!
could you give some more info about your input source. You tried only SNES -> Sync Strike -> faroudja NR series -> xx?
Re: New Sync Strike - Available Now!
I just got mine today, I'm sure this is a VERY dumb question but, how on earth do I attach the PSU? I cannot find a connector that is suitable anywhere on the Sync Strike, the only one I see which says 5V and GND is a totally different connector to the one on the PSU I've been sent.
OSSC Forums - http://www.videogameperfection.com/forums
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Re: New Sync Strike - Available Now!
You'll have to fit an appropriate connector off the 5v & GND blocks. Either that or chop the connector off the PSU and hardwire.BuckoA51 wrote:I just got mine today, I'm sure this is a VERY dumb question but, how on earth do I attach the PSU? I cannot find a connector that is suitable anywhere on the Sync Strike, the only one I see which says 5V and GND is a totally different connector to the one on the PSU I've been sent.
Re: New Sync Strike - Available Now!
Ah right, I did wonder if that was the case but I thought I better ask before I started chopping away, thanks.
OSSC Forums - http://www.videogameperfection.com/forums
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
-
ceramiclion
- Posts: 55
- Joined: Thu Dec 22, 2011 11:39 pm
Re: New Sync Strike - Available Now!
Yes I only tried my SNES.bencao74 wrote:could you give some more info about your input source. You tried only SNES -> Sync Strike -> faroudja NR series -> xx?
It goes like this
SNES on SCART>Sync Strike>Faroudja NR> VGA to HDMI convertor> LG HDTV. I have tested and know for a fact that the sync strike is good is that Faroudja NR series that doesnt like the connection.
Re: New Sync Strike - Available Now!
Have you tried the Sync Strike with the SNES on another processor that works then?ceramiclion wrote:Yes I only tried my SNES.bencao74 wrote:could you give some more info about your input source. You tried only SNES -> Sync Strike -> faroudja NR series -> xx?
It goes like this
SNES on SCART>Sync Strike>Faroudja NR> VGA to HDMI convertor> LG HDTV. I have tested and know for a fact that the sync strike is good is that Faroudja NR series that doesnt like the connection.
-
ceramiclion
- Posts: 55
- Joined: Thu Dec 22, 2011 11:39 pm
Re: New Sync Strike - Available Now!
No unfortunately I dont have another processor but the sound works and the the sync strike lights up.fagin wrote:
Have you tried the Sync Strike with the SNES on another processor that works then?
Re: New Sync Strike - Available Now!
That don't mean shit I'm afraid. The Sync Strike does not work with certain connections on a DVDO EDGE for instance, regardless of the lights and audio..... it's a sync issue.ceramiclion wrote:the sound works and the the sync strike lights up.fagin wrote:
Have you tried the Sync Strike with the SNES on another processor that works then?
Re: New Sync Strike - Available Now!
I made my own sync stripper thanks to fagin but I keep getting static on the screen & most of my scart machines dont work.
NTSC SNES -> works fine when pluged into my LCD TV, nothing on screen when plugged into my homemade stripper
Playstation 2 -> Screen has static when plugged into my homemade stripper, works fine in the TV
Not tried Megadrive yet.
If I buy one of these will it play all the many consoles machines hassle free?
Ta
NTSC SNES -> works fine when pluged into my LCD TV, nothing on screen when plugged into my homemade stripper
Playstation 2 -> Screen has static when plugged into my homemade stripper, works fine in the TV
Not tried Megadrive yet.
If I buy one of these will it play all the many consoles machines hassle free?
Ta
Re: New Sync Strike - Available Now!
How you feeding the scaler from the PS2? SCART or Component?
Re: New Sync Strike - Available Now!
Official scart lead
Re: New Sync Strike - Available Now!
That and the SNES works fine for me on the LM1881.
-
ceramiclion
- Posts: 55
- Joined: Thu Dec 22, 2011 11:39 pm
Re: New Sync Strike - Available Now!
I have own the sync strike and quite honestly it hasn't been a very smooth ride. I just started noticing that the video quality is inferior to the one given in my SCART to YUV converter. I have reason to believe that it is actually giving composite video instead of RGB (the reds look awful and the video is very blurry). Also, I am having sync problems with my sega saturn. I was previously blaming the CGA2VGA converter for the quality but I have done some testing by using the Y-pb-pr input provided in the CGA2VGA and now I know that the problem lies in the Sync Strike. Also, the front page states that there is a way to switch the Sync Strike from C-sync to H-sync. Where exactly is that switch? Do i have to solder something?
Re: New Sync Strike - Available Now!
it may look like composite but that's impossible to actually be composite.ceramiclion wrote:I have reason to believe that it is actually giving composite video instead of RGB (the reds look awful and the video is very blurry)
-
- Posts: 213
- Joined: Thu Jul 07, 2011 9:55 am
Re: New Sync Strike - Available Now!
fagin, as usual, thanks for your help. I finally got around to ordering an Extron RGB as you had said, and the thing is totally incompatible. Trust me, I know I'm a moron, but let me know what I did wrong. This is what I ordered:
http://www.ebay.com/itm/180727585272?ss ... 1439.l2649
Did I screw up because it's the Mac/Quadra interface? I had no idea what that even was, I just searched "Extron RGB" and ordered the first one that popped up. Let me know, I want my games to look as good as yours!
http://www.ebay.com/itm/180727585272?ss ... 1439.l2649
Did I screw up because it's the Mac/Quadra interface? I had no idea what that even was, I just searched "Extron RGB" and ordered the first one that popped up. Let me know, I want my games to look as good as yours!
Re: New Sync Strike - Available Now!
The 103 is about the oldest interface you could have found. 17+ years ?
Not sure if it already has the full sync processing the other units have. The input is not really a problem. It's just different plug.
Not sure if it already has the full sync processing the other units have. The input is not really a problem. It's just different plug.
-
- Posts: 213
- Joined: Thu Jul 07, 2011 9:55 am
Re: New Sync Strike - Available Now!
Jeez, it's like I was trying to buy the only wrong one on eBay or somethingFudoh wrote:The 103 is about the oldest interface you could have found. 17+ years ?
Not sure if it already has the full sync processing the other units have. The input is not really a problem. It's just different plug.
Can you do me a huge, gargantuan favor, and link me to the cheapest one on eBay that will do your thing with the Edge?
-
- Posts: 213
- Joined: Thu Jul 07, 2011 9:55 am
Re: New Sync Strike - Available Now!
US, just put a bid in. Hope I win! Maybe this will save me from having to buy the XRGB Mini
Thanks as usual, Fudoh. You're a damn saint.
Thanks as usual, Fudoh. You're a damn saint.
Re: New Sync Strike - Available Now!
Unless you use the Edge for DVDs, TV etc A LOT, you should definitely consider selling the Edge the getting a Mini instead. It's a day and night difference, really.