So, ever since I bought this little wonder I've been suspicious about the relatively low volume level of the signal coming out of the audio out RCA connector.
Whatever I have the thing plugged into has to have volume turned up to at least twice what I need to set it to for other sources or it wont be loud enough for my taste.
If anyone else has such a unit could you share whether you experience the same or it is just my unit that prolly needs some capacitors replaced. I would just go ahead and replace the capacitors regardless but the designers of this thing sure were not shy about sprinkling plenty of these little things on every board.
Such an undertaking would be a pain in the arse if fruitless.
Oh, and the audio quality is fine once the volume is turned up, no buzzing or other sort of interference.
Famicom Titler Audio volume level
-
kamiboy
- Posts: 2000
- Joined: Sat Sep 04, 2010 4:40 pm
- Location: Denmark
-
ccovell
- Posts: 203
- Joined: Mon Feb 14, 2005 3:03 am
- Location: Japan
- Contact:
Re: Famicom Titler Audio volume level
Did you turn the dial up all the way on the audio mixing wheel on the left side of the Titler?
http://www.chrismcovell.com
Chris' Journey
Chris' Journey
-
kamiboy
- Posts: 2000
- Joined: Sat Sep 04, 2010 4:40 pm
- Location: Denmark
Re: Famicom Titler Audio volume level
Yeah, it is all the way up,