Sony BVM I can't customize any of the channels please help

[BVM-PVM]

I have a sony BVM-A20F1U monitor, everytime I adjust the picture alignment for one channel it changes the other channels alignment as we'll. Meaning every channel has the same alignment. Does anyone know how customize the picture size for each channel?

[Fudoh]

You can't do that. The BVM sets have four geometry slots (4:3 and 16:9, both in an under- and overscan version). This means you can save four geometry configs and assign them to your channels as you like.

[BVM-PVM]

Thanks for the info Fudoh. I really appreciate it.

[Monstermug]

On the 20F1E's (european model) you can only save the horizontal positioning on each channels. As soon as you change any other alignment configurations, it changes for all channels. I find it a bit annoying that you aren't allowed to save specific alignments on each channel but then again, I have never came across any crt that can do this. However, having the ability to save Chroma, Brightness, and Contrasts settings (amongst other things like channel name) is a definite plus.

[Fudoh]

As soon as you change any other alignment configurations, it changes for all channels

as I said above. You have four completely configurable slots on which you can change and adjust everything and you can assign them to your channels. Unless you have more than four completely different sources on your monitor, that's easily enough.