PVM 2130QM: screen tearing/rolling + adjustable pots

[Magicalbottle]

hi all, I have the following problem with my PVM: the screen keeps rolling from top to bottom.

[Drachenherz]

There should be a pot on the upper back of the monitor (I think it's labeled "H-roll" or "V-roll or sumpfing) to calibrate the image, that should take care of the rolling image on the one set. Don't know about the other.

[arcade-stg]

You are right, there is a pot on the back to take care of v-rolling. Unfortunately, the pot to take care of h-rolling is inside of the monitor.

[Magicalbottle]

thanks, screen is good now

[Magicalbottle]

Looking for pot functions atm.

[matrigs]

Dood, don't do something like this.

The whole point of the hardware section is to leave the topics for further reference.

[evil_ash_xero]

Herpes?

[undamned]

Dood, don't do something like this.

The whole point of the hardware section is to leave the topics for further reference.

I was able to at least restore the topic title
-ud

[matrigs]

Dood, don't do something like this.

The whole point of the hardware section is to leave the topics for further reference.

I was able to at least restore the topic title
-ud

Imho there should be a general forum rule not to do so, especially in the trading section where you cannot track anything due to "all sold".

[Magicalbottle]

oops sorry, let me edit all. Done