I hope somebody can prove me wrong and tell me that it indeed has got killer true Stereo sound, I will get soldering like a madman.
![Cool 8)](./images/smilies/icon_cool.gif)
Since my Jamma harnas is made for MONO only
![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
Jamma harnesses wired for stereo do not exist. Seibu SPI motherboards output stereo from an auxiliary connector located near the heat sink.D wrote:Since my Jamma harnas is made for MONO only
Do you have some documentation on that pinout? I wonder if it is correct given that most stereo connectors are pinned +/-/-/+ (MVS, G-Net, etc.)Stefan_L wrote:
You see it is marked 1 on the left side and 4 on the right side, thats the pin numbers.
So beginning from left (pin 1) is "L speaker +" and then pin 2 is "L speaker -" (aka ground) then pin 3 is "R speaker +" and finally pin 4 is "R speaker -".
Thats where you should connect your speakercables, the speakers must be 8 ohm each.
documentation: All raiden fighters manuals:oxtsu wrote:Do you have some documentation on that pinout? I wonder if it is correct given that most stereo connectors are pinned +/-/-/+ (MVS, G-Net, etc.)Stefan_L wrote:
You see it is marked 1 on the left side and 4 on the right side, thats the pin numbers.
So beginning from left (pin 1) is "L speaker +" and then pin 2 is "L speaker -" (aka ground) then pin 3 is "R speaker +" and finally pin 4 is "R speaker -".
Thats where you should connect your speakercables, the speakers must be 8 ohm each.