Show your Tate setup thats not a cab or arcade machine

[caincan]

except recent lcd. good ghetto style

futurematt5. sounds like a bunch of laserdiscs movies at right side ?!

[undamned]

SG in NES case

Haha, nice!
-ud

[BulletHeaven]

SG in NES case

Haha, nice!
-ud

Thanks!, took over a year to decide what to put it in!

[shmuppyLove]

SG in NES case (with 'blazblue' stick, all sanwa parts)

Oh the buttons are backwards though! Though for most shmups you don't really need more than 3, but I always prefer:

1 2 3
4 5 6

Especially for the "Esp" games where you can set rapid shot on 4, you can use your thumb and still have your first three fingers for the top row.

I'd definitely like to see more pics of the "sNESergun" - to the Supergun thread!

[limpan]

Took my brand new tate setup for a test drive tonight!

[BulletHeaven]

SG in NES case (with 'blazblue' stick, all sanwa parts)

Oh the buttons are backwards though! Though for most shmups you don't really need more than 3, but I always prefer:

1 2 3
4 5 6
...
I'd definitely like to see more pics of the "sNESergun" - to the Supergun thread!

but im so used to my action buttons being where they are, on any system, that id probably end up switching them back if i did it your way, but hey if it works for you...

need to finish reading the SG thread first

limpan: is your room always that grey?( )

[Konsolkongen]

Here is Panasonic S20 in TATE mode. The walls need a fresh layer of paint like there's no freaking tomorrow...

[CMPXCHG8B]

Here is Panasonic S20 in TATE mode. The walls need a fresh layer of paint like there's no freaking tomorrow...

What game is that?

It looks Cave-ish, but almost 3D? Is that SDOJ?

-CMPX

[Thjodbjorn]

Here is Panasonic S20 in TATE mode. The walls need a fresh layer of paint like there's no freaking tomorrow...

What game is that?

It looks Cave-ish, but almost 3D? Is that SDOJ?

-CMPX

That's Dodonpachi Daifukkatsu.

[RaidenViper]

[CloudyMusic]

Not fancy, but it lets me use both my HDTV (PC monitor, standard console games) and my tate component CRT from the comfort of my recliner

[finisherr]

i miss my tate setup

[MSZ]

Just bought a VH236H, and 1CCed two CAVE shmups(CAVE shmups always have been my nemesis, never had any luck beating them) right after I tated it, should've done this much earlier.

EDIT: Slightly better pics

[ryu]

i still need to get some sort of degaussing coil someday, but this spot of impurity isn't nearly as bad as it looks here.
i'm just glad i can finally play in tate mode too... took me a while to get the idea of how i could set up my furniture to make space for this.

[matrigs]

i still need to get some sort of degaussing coil someday, but this spot of impurity isn't nearly as bad as it looks here.
i'm just glad i can finally play in tate mode too... took me a while to get the idea of how i could set up my furniture to make space for this.

doesn't it have an internal coil ? the connector is most probably loose.

ghetto degaussing - if you put another tv/crt in front of this one, screen to screen, and degauss the working one the second will also degauss.

much better then waggling a magnet in front of it.

[ryu]

i still need to get some sort of degaussing coil someday, but this spot of impurity isn't nearly as bad as it looks here.
i'm just glad i can finally play in tate mode too... took me a while to get the idea of how i could set up my furniture to make space for this.

doesn't it have an internal coil ? the connector is most probably loose.

ghetto degaussing - if you put another tv/crt in front of this one, screen to screen, and degauss the working one the second will also degauss.

much better then waggling a magnet in front of it.

interesting. this is the first time i've heard about this. yes the monitor has internal degaussing, but from what i've heard these models generally seem to have this kind of issue when used for tate. the impurity isn't really there when i have it set up horizontaly.
guess i'll try your solution anyways, thanks for the hint.

[rugdoctor]

I have a tate 14" pvm and all it took was time to rid of the impurities and if you return to the original orientation then it also takes time to become perfect again. Also it helps to only move the crt when its off, you can get some funky colouring when you rotate it while its on (not that I do that ).

[ryu]

yeah that ghetto degaussing method didn't help. It got fixed for a little moment while the degaussing was taking place, but instantly reverted to the impurity after that.

I have a tate 14" pvm and all it took was time to rid of the impurities

I've heard that quite often, but apparently it shouldn't take too long, should it? My current tate monitor ahs been in that position for a few weeks now.

[rugdoctor]

should just take less than an hour at most, can probably try the tate'd monitor in a different area of the room? Worst case senario is to get a degaussing wand and use that to do the degaussing for you.

[Guardians Knight]

can anyone recommend a good place to get a rotatable wall mount from for my 37" flat screen lcd toshiba? my old crt works fine like, but i'd like to try out the high res newness in tate.....

[Thjodbjorn]

can anyone recommend a good place to get a rotatable wall mount from for my 37" flat screen lcd toshiba? my old crt works fine like, but i'd like to try out the high res newness in tate.....

http://www.mounts.com/flat-panel-mounts/rotating

Starting at $72 for a rotating wall mount.

Edit: I didn't realize you were in the UK. I don't know how bad shipping would be, but I imagine someone else knows of a good place over there...

[Aguilar]

Well finally got my RGB TATE setup going. Seems like it took forever. The geometry isn't the greatest and the picture is a little wavy at times but I can deal with it. So glad to have this in my collection.

[1up]

Got my Ergotron Neo-Flex LCD Stand today. So now it's time to show off the TATE setup

26" Phillips LCD w/ Neo-Flex Stand
Hori Real Arcade Pro VX-SA modded with octo-gate and Seimitsu Screw-in Buttons
XBOX 360 and MAME is attatched to this setup

[noiseredux]

new Neo-Flex stand for my 23" Acer monitor:

[dunpeal2064]

Dude, nice! I bet that was an eye-opener!

[gabe]

Tube tate!

[RaidenViper]

Tube tate!

What's the game on left?

That is one cool looking monitor

[gabe]

Tube tate!

What's the game on left?

That is one cool looking monitor

Thanks! The game on the left is Radiant Silvergun displayed on a Sony PVM 20L5 (20").

The game on the right is Shikigami no Shiro II displayed on a Sony Trinitron E540 (21").

[RaidenViper]

Tube tate!

What's the game on left?

That is one cool looking monitor

Thanks! The game on the left is Radiant Silvergun displayed on a Sony PVM 20L5 (20").

The game on the right is Shikigami no Shiro II displayed on a Sony Trinitron E540 (21").

Oh, now I see it. My first guess was Giga Wing 2. But there was way too less bullets on screen to be it

Been wanting a Sony PVM monitor for a long time now. They're really hard to find...

[renardqueenston]

got the ghettotate + supergun set up in a set place again for the first time in a while. not always ghettotate (sometimes ghettoyoko!), but usually.

some cheapo JVC TV i snagged from somebody on kijiji for free, has great component picture! supergun's the ol' faithful VEGA 9000 DX (w/ PSX and Saturn adapters, too!). CPS2 below, other JAMMA above, and a Yaroze i got on the cheap. need to snag a second Saturn for this setup and find a place to put my MVS and PGM carts that isn't out in the living room, hahahaha!