Arcade Psikyo + clitoris

[AeroCityMayor]

Hi y'all,

I just acquired a clitoris (cheating auto-fire pussy button) with another new-to-me Sega Aero City cabinet and I wondered how to install it to work with Psikyo shooters (1945, 1945ii, Gunbird etc)?

The obvious answer is to hack it into the loom to effectively add a Full Button Auto option but how do I keep the option to charge the special weapon?

TIA.

Cheers,

Ralph.

[Estebang]

Yeah...are you trying to invent new jargon here? I don't think it's going to catch on, for good reason...

[mesh control]

you bought a button that make the game easier on the hands.

clitoris' are much more expensive.

[AeroCityMayor]

No, just trying to increase my session time from a few hours to tantric double figures

At the same time admitting my weaknesses in aspiring to become becoming a cheating git

So, you got any ideas how to install this thing then?

Thanking you in anticipation of hardware enlightenment,

Ralph.

[Ed Oscuro]

So, you got any ideas how to install this thing then?

Well, you're not a woman, so it's not going to work, pretty simple.

Might as well just call it an autofire circuit...isn't it just a plug and play circuit between the JAMMA connector edges of the board and your harness, or did you buy something you have to splice inbetween wire leading to the controller?

[AeroCityMayor]

Yeah, it's a pretty simple piece of kit but in Psikyo shooters you have to press and hold Player_1 Button_1 to use the special shot - I just wondered if anyone had found a simple solution before I start hacking the looms in my cabs.

Cheers,

Ralph.

[antron]

Is your circuit a JAMMA inline, or seperate one?

Either way you need to take an extra button and wire it to the fire input on the PCB side of your circuit. This way when the auto fire releases ground from the input, the game board still sees ground.

With a JAMMA inline circuit it can be done with a tiny piece of wire on the circuit that bridges button 4 over to button 1 on the board side.

You could even make this mod to your game board if you wanted. Just bridge buttons 1 and 4 (or 3).

[emphatic]

Make a splitter like below:

[AeroCityMayor]

Is your circuit a JAMMA inline, or seperate one?

Either way you need to take an extra button and wire it to the fire input on the PCB side of your circuit. This way when the auto fire releases ground from the input, the game board still sees ground.

With a JAMMA inline circuit it can be done with a tiny piece of wire on the circuit that bridges button 4 over to button 1 on the board side.

You could even make this mod to your game board if you wanted. Just bridge buttons 1 and 4 (or 3).

Cheers d00d, that's what I suspected.

Ralph.

[AeroCityMayor]

Make a splitter like below:

Thank you stranger :awe:

Cheers,

Ralph.

[AeroCityMayor]

Cheers emphatic, works a treat!

Strikers 1945 Pt II is really different with full button auto!

Cheers,

Ralph.