
but first I would like to thanks every one who helped me with info and specialy Japtor for his great scans

Ok I started with drawing all the plans on paper, starting from pictures:

after that started to cut the acryl plate and make some holes...

the acryl plate looks like that after the work:

now from the acryl template I made the wood top of my panel:

then glue all the wood plate together:

ok after all the plates are well glued I cut all with my jigsaw (such thickness was the limit for the blade)

finaly drill some holes in it, and break the angles with a cool tools that turn at 30'000 t/min .... very noisy for the neighbors

And finaly after some good paint (made by my wife) and placing some pictures in it. here it is !!

and here you can see in detail the joystick panel:

It was made of multiple wood layer, sticked together.

