How many titles have been released on this M92 rework.
When did this hardware start circulation.
Not seen this one before. Undercover Cops - Alpha.
http://cgi.ebay.co.uk/Arcade-pcb-board- ... 19ba276606
The IREM Korea (licensed ?) pcb
-
pcb_revival
- Posts: 276
- Joined: Sat Feb 12, 2005 10:40 am
- Location: North West - UK
-
Magic Knight
- Posts: 206
- Joined: Thu Jul 14, 2005 10:00 am
- Location: Japan
Re: The IREM Korea (licensed ?) pcb
I have a Ninja Baseball Batman that's Korean. It's a genuine Irem board, so there's no problem there. Don't know much about the others though.
-
pcb_revival
- Posts: 276
- Joined: Sat Feb 12, 2005 10:40 am
- Location: North West - UK
Re: The IREM Korea (licensed ?) pcb
Is it this same M92 Korean revision pcb or the first release M92 hardware?Magic Knight wrote:I have a Ninja Baseball Batman that's Korean. It's a genuine Irem board, so there's no problem there. Don't know much about the others though.
-
Magic Knight
- Posts: 206
- Joined: Thu Jul 14, 2005 10:00 am
- Location: Japan
Re: The IREM Korea (licensed ?) pcb
Well, it's the M92-A version, if that's any good to you. I'm not sure exactly what to look out for though.
-
pcb_revival
- Posts: 276
- Joined: Sat Feb 12, 2005 10:40 am
- Location: North West - UK
Re: The IREM Korea (licensed ?) pcb
I did a bad job phrasing the previous question.Magic Knight wrote:Well, it's the M92-A version, if that's any good to you. I'm not sure exactly what to look out for though.
Is you Ninja BaseBall Batman the same pcb as shown in the auction.
-
Magic Knight
- Posts: 206
- Joined: Thu Jul 14, 2005 10:00 am
- Location: Japan
Re: The IREM Korea (licensed ?) pcb
It's almost the same, I can't quite see the one on ebay properly. I think some of the chips on his may be soldered directly on whereas on mine they're socketed etc., but generally speaking, you can take it that it's the same hardware, just with a few very small differences.
Mine also has the big sticker on it, the one with Korean text, except mine's on the other board. That's the other thing about it - there's no picture of the other board, so I can't compare them.
Mine also has the big sticker on it, the one with Korean text, except mine's on the other board. That's the other thing about it - there's no picture of the other board, so I can't compare them.
-
pcb_revival
- Posts: 276
- Joined: Sat Feb 12, 2005 10:40 am
- Location: North West - UK
Re: The IREM Korea (licensed ?) pcb
Thanks for the infomation Magic Knight.
-
Arasoi
- Posts: 677
- Joined: Wed Aug 16, 2006 3:52 am
- Location: https://www.youtube.com/watch?v=4FZcI8EVW-c
Re: The IREM Korea (licensed ?) pcb
.
Last edited by Arasoi on Sat Jun 20, 2020 9:50 am, edited 1 time in total.
-
pcb_revival
- Posts: 276
- Joined: Sat Feb 12, 2005 10:40 am
- Location: North West - UK
Re: The IREM Korea (licensed ?) pcb
That would be great.Arasoi wrote:I won the auction for this pcb, if you like I can take more detailed pictures /provide more information on the board once it arrives.
The more infomation for the collective the better.
-
Arasoi
- Posts: 677
- Joined: Wed Aug 16, 2006 3:52 am
- Location: https://www.youtube.com/watch?v=4FZcI8EVW-c
Re: The IREM Korea (licensed ?) pcb
.
Last edited by Arasoi on Sat Jun 20, 2020 9:49 am, edited 1 time in total.
-
Arasoi
- Posts: 677
- Joined: Wed Aug 16, 2006 3:52 am
- Location: https://www.youtube.com/watch?v=4FZcI8EVW-c
Re: The IREM Korea (licensed ?) pcb
.
Last edited by Arasoi on Sat Jun 20, 2020 9:49 am, edited 1 time in total.
Re: The IREM Korea (licensed ?) pcb
The camera flash won't have any effect on EPROMs.
-
Magic Knight
- Posts: 206
- Joined: Thu Jul 14, 2005 10:00 am
- Location: Japan
Re: The IREM Korea (licensed ?) pcb
My Ninja Baseball Batman has these same three IDs. Bottom board doesn't have anything on it though, as far as I can see.Arasoi wrote: Top board is marked M92-A-B, has the following numbers: 05C04170B1, MDK321V-0