Strikers 1945 Free play

[shess]

I finally got my Strikers 1945 board hooked up and I'm trying to enable free play. After looking at the manual it says to flip dip switches 1-8 on bank 1 to ON for free play. I do this and it didn't work. Can anyone with this game try it out or tell me what dips I have to set to get free play? I know it would be easier to hook up a button or just connect the coin mechs but my cabinet is configured such that it's not easy to do any of that.

Thanks,
Scott

[emphatic]

I finally got my Strikers 1945 board hooked up and I'm trying to enable free play. After looking at the manual it says to flip dip switches 1-8 on bank 1 to ON for free play. I do this and it didn't work. Can anyone with this game try it out or tell me what dips I have to set to get free play? I know it would be easier to hook up a button or just connect the coin mechs but my cabinet is configured such that it's not easy to do any of that.

Thanks,
Scott

http://www.world-of-arcades.net/1945/St ... Manual.htm

[shess]

Right, I've already got that. I followed the instructions and it didn't work.

[emphatic]

Sorry. Does your cab have a SERVICE switch? I think that maybe you'll have to change the coinage dips to put it in free play, been a while since I played this in my cabs.

[shess]

I didn't try the service switch yet; one of the dip switches is for test mode so I figured the service switch didn't have any effect. Yea, according to the manual, I should only have to set some dips to enable free play. Hopefully someone has this hooked up or can have it hooked up easily to check on it for me. Thanks again.

Scott