so i just got a JPAC and the PSX adapters to go with it and im having some issues
before i get into the issues i must ask....the male end on the supplied VGA cable is missing a pin.....is this normal??
i have a feeling this is what is causing my issues.......
with the ps2 hooked up i get a picture and controls but the picture looks as if im wearing night vision goggles..very odd
i have all the jumpers removed when trying the ps2
and when i hook it up to my PC with a radeon x1600 pro 512mb using soft15khz and quick res running at 15khz i get a garbled picture.....i have fiddled with the holds and no luck......can kinda stablize it a bit but still really messed up
and contrary to the ultimarc site unless i have quickres running at 320X240 i get no picture on the monitor.....even at 640X480, which should give me the double screen....
with the PC i have the jumpers on 15 and 31 khz as instructed on the ultimarc site
i have emailed andy at ultimarc but i figured i would see if anybody here had any ideas....
i was stoked to get this stuff and none of it is working for me....and im positive its all set up right according to the site...
im at a loss......and not very impressed......
please help
jpac questions
The missing pin on the supplied VGA cable is normal. I use the one they gave me, and it works perfect with my arcade monitor/PC. I'm also using it with the default settings with the jumpers on the 15khz and 31khz pins.
I could never get it working with a standard video card, so I use the arcadeVGA which will display on arcade monitors natively. I am sure it's your video card/drivers.
As far as the PS2 goes... I am assuming you bought ultimarcs control adapters..
I know for the console kits you have to buy a little adapter that the VGA from the console goes to. It amplifies the video and has a sync separator circuit. You need this even if you're using a jpac. That may be your issue.
I could never get it working with a standard video card, so I use the arcadeVGA which will display on arcade monitors natively. I am sure it's your video card/drivers.
As far as the PS2 goes... I am assuming you bought ultimarcs control adapters..
I know for the console kits you have to buy a little adapter that the VGA from the console goes to. It amplifies the video and has a sync separator circuit. You need this even if you're using a jpac. That may be your issue.
-
- Posts: 8523
- Joined: Wed Jan 26, 2005 10:32 pm
For some folks, they forget that the PS2 console does have built-in output for RGB and Component Video, outputting in RGB mode does the trick quite nicely. ^_~jonny5 wrote:got the ps2 sorted....i had to go into the bios and switch it to RGB.....it looks amazing....im actually quite surprised how sharp it looks
now i guess i just need an arcadeVGA card and i should have the PC up and running in the cab
An Ultimarc Arcade VGA Card is nice to have, btw.
PC Engine Fan X! ^_~
-
brokenhalo
- Posts: 1394
- Joined: Wed Mar 26, 2008 4:11 am
- Location: philly suburbs
no problem.....out of curiousity why 2 player games??
is it an issue with the player 2 side or using both sets of controls at once??
cuz i will have a 1L6B panel on my cab in the next few weeks so if its just the 2 player side or both used at once i wont have any issues
hopefully all is well.....cuz it looks soooooo good on the cab!!!
i suppose i can hack some ps2 pads to the CP but that would be a bother....
i will keep you guys posted on the control adapters performance over the next few days....im planning on putting it through the works tonight.....
is it an issue with the player 2 side or using both sets of controls at once??
cuz i will have a 1L6B panel on my cab in the next few weeks so if its just the 2 player side or both used at once i wont have any issues
hopefully all is well.....cuz it looks soooooo good on the cab!!!
i suppose i can hack some ps2 pads to the CP but that would be a bother....
i will keep you guys posted on the control adapters performance over the next few days....im planning on putting it through the works tonight.....
-
brokenhalo
- Posts: 1394
- Joined: Wed Mar 26, 2008 4:11 am
- Location: philly suburbs