Egret II Degauss

fuko · Post by **fuko** » Mon Feb 04, 2008 5:33 pm

Just wondering if anyone knows how to degauss the monitor on an Egret II. It seems this model is lacking the giant degauss button that graced the Egret 29. OR, does it degauss on startup like I've heard on some Atomiswaves? Any help appreciated.

Radiant · Post by **Radiant** » Mon Feb 04, 2008 5:35 pm

-Egret2 has degauss on startup
-Atomiswave SD has manual degauss

fuko · Post by **fuko** » Mon Feb 04, 2008 7:51 pm

Thanks, that's what I suspected. If my monitor has some minor image warping around the edge, would manually degaussing the coils with a wand help to correct that?

Post by **Dave_K.** » Mon Feb 04, 2008 8:23 pm

No, degaussing helps with color impurities due to magnetic interference/ rotating the screen. Screen warping at the edges is a geometry issue, and is only sometimes fixed by the pots on the PCB (pincushon and trapazpoid adjustments). If the warping is only slight, then even these adjustments may not help.

fuko · Post by **fuko** » Mon Feb 04, 2008 8:33 pm

very helpful. Thanks guys!