Turrican wrote:screwdriver related - what kind of screwdriver do I need to open GBA carts? Thanks!
The Tri-Wing Gamebit screwdriver is what's needed to open up them GBA carts and/or the GBA/GBA SP/GBA Micro handheld gaming devices (for modding purposes).....
SNES carts are gamebit screws... the cheap way to do it is to grab a bic pen, pull out the cartridge, hold it over a flame for a moment then stab it onto the screw. The problem is that some pens are too soft and will need to be re-melted after a few screws.
MCM Electronics (http://www.mcmelectronics.com/) sells the gamebits. They're pretty cheap, but watch out, they'll gouge you on the shipping.
We here shall not rest until we have made a drawing-room of your shaft, and if you do not all finally go down to your doom in patent-leather shoes, then you shall not go at all.