Hi everyone!
I recently installed a NESRGB (rev 43 tw 2024) on a PAL NES with stock components (I guess). I routed the output throught the AV multi out (using a QSB, not single wires) and connected via a RAD2X to a samsung Oled TV.
Let’s say that everything is working like a charm, i didn’t need the capacitor fix or the 22nd pin cut ‘cause everything just worked fine out of the box but the only thing that bothers me is a flickering horizontal band moving upwards, noticeable on bright colors.
The nice thing is that plugging a composite cable at the same time (indifferent if audio or video) istantly solves the problem (i just connect the cable to a cheap scaler, turned off, and to the tv via hdmi).
probably it could be an easy fix, any help would be greatly appreciated! thanks!
<div style="position: relative; padding-bottom: 56.25%; height: 0;"><iframe id="js_video_iframe" src="https://jumpshare.com/embed/bJiUfS8Cm0BTeo9jZ5R2" frameborder="0" webkitallowfullscreen mozallowfullscreen allowfullscreen style="position: absolute; top: 0; left: 0; width: 100%; height: 100%;"></iframe></div>