NESRGB v4 on PAL (FRA) NES - Video is distorted

[Beubeu]

Hi everybody,

I recently installed a NESRGB V4 in a PAL (FRA) NES (the one with the multi-out-like output).

I'm using the original RGB cable. Image is scaled with a Retrotink-5X.



As you can see, rows of pixels are slanted, I don't know why. The picture is stable otherwise.
Any idea what might be causing this?

Thx!

[KPackratt2k]

It looks like it could be sync jitter. Is J10 open or shorted? If it's open, try shorting it to see if that fixes it.

[Beubeu]

Documentation says J10 only affects NTSC unfortunately

[zalves]

Hi everybody,

I recently installed a NESRGB V4 in a PAL (FRA) NES (the one with the multi-out-like output).

I'm using the original RGB cable. Image is scaled with a Retrotink-5X.



As you can see, rows of pixels are slanted, I don't know why. The picture is stable otherwise.
Any idea what might be causing this?

Thx!

I have exactly the same problem, did you ever managed to solve it?

[Beubeu]

Hello, yes I solved it. If I remember correctly, I forgot to close a jumper or two (J4 and J7). Simple user error .

[zalves]

Hello, yes I solved it. If I remember correctly, I forgot to close a jumper or two (J4 and J7). Simple user error .

Thanks! Simple mistake, I followed some youtibe videos that were by NTSC users, so it goes unoticed.