SOLVED: MiSTer with JammASD - Button 6 not responding

[elrubioVS]

I have my DE10 connected to a JammASD interface which is then connected to my Jamma harness, however button 6 doesn't work on P1 or P2.

When I connect the Jamma harness to a Jamma board (412 vertical games) all buttons work on the input test and in-game, including button 6.

When I connect the Jamma harness to my JammASD adapter for the DE10 button 6 does not respond at all. I've tried on pretty much all relevant games and in the remapping setup. All other buttons work perfectly but button 6 just doesn't respond.

Couple of questions:

• Has anyone experienced this?

• Can anyone suggest how I troubleshoot this issue?

• Can someone advise how to reset all the button inputs and/or mappings?

[elrubioVS]

SOLVED: The JammASD board does not take button 6, 7 & 8 inputs from the Jamma harness. They have to be wired seperately.

I snipped the button 6 wires that led from the buttons to the Jamma harness and wired them directly into the JammASD board.