Buenas tardes, disculpe mi ingles estoy usando un traductor..
soy nuevo en este foro, ando buscando ayuda, estoy haciendo un mod a un TV sony KV-27V10 Chasis AA-1
Hasta los momentos lo que hecho es retirar el Closed Caption de la placa e inyectar el rgb directo al chip CXA1465AS
el YS levanta a partir de 1v, en las lineas RGB solo he puesto una resistencia de 75ohm a tierra y un condensador de 0.1uf
y la sincronia la obtengo por video compuesto, el problema esta enque los colores se me ven muy oscuros y el blanco de se ve gris. alguna recomendacion
Aqui les dejo imagenes de como se ve:
Estoy intentando usar una pc con los emudriver para emitir a 15 khz.
Gracias!!!
https://imgur.com/b2JO8pl
https://imgur.com/wdgvwV0
Good afternoon, excuse me my English I am using a translator ..
I'm new to this forum, I'm looking for help, I'm making a mod to a Sony KV-27V10 TV Chassis AA-1
So far what I have done is remove the Closed Caption from the board and inject the rgb directly to the CXA1465AS chip
the YS lifts from 1v, in the RGB lines I have only put a 75ohm resistor to ground and a 0.1uf capacitor
And I get the synchrony by composite video, the problem is that the colors look very dark and the white looks gray. Any recommendation
Here I leave you images of how it looks:
I am trying to use a pc with the emudriver to broadcast at 15 khz.
Thanks !!!