Hi All,
I have DC Digital installed - working great. I have it set to cable detect mode. I am trying to use an analog cable from RetroAccess that has a 15kHz passthrough but I'm getting sync issues on my 240P/480i PVM. A standard composite cable works fine. Did I make an oops when I thought this cable would work on my PVM?
I have tried toggling the two Sync-related switches on the gscartsw. The DC splash plays, but it's purple. When I toggle the "disable sync on green compensation" switch, the DC splash is white, but the image is still poor quality.
I have the switch on the cable set to 15kHz. All other SCART sources going into the switch look fine.
Also, I plugged the DC SCART cable into the 2X-SCART and get no image there.
Any ideas?
RetroAccess DC SCART with GSCARTSW
Re: RetroAccess DC SCART with GSCARTSW
Is it this cable?
https://retro-access.com/products/dream ... cart-cable
Something is either wrong with the dreamcast or the cable, because that cable should work fine with the PVM and 2X-SCART if the switch is at 15 khz.
https://retro-access.com/products/dream ... cart-cable
Something is either wrong with the dreamcast or the cable, because that cable should work fine with the PVM and 2X-SCART if the switch is at 15 khz.
-
- Posts: 3
- Joined: Fri Mar 05, 2021 4:25 pm
Re: RetroAccess DC SCART with GSCARTSW
That's the one. I did get a slightly longer length so maybe that's a factor. 6 ft. I contacted RetroAccess, so we'll see how it goes. Thanks!