Convert your OG Xbox Classic 110v PSU to 220v.

[cryptblood1986]

https://imgur.com/a/0OkmO12

Might be a 5th model but these ones in the pic I've converted.

[Josh128]

Whats the use case for this?

[nmalinoski]

Whats the use case for this?

Being able to use an NTSC Xbox in a 220V/PAL territory without a step-down/frequency converter, and without having to source a secondary PAL PSU (because there were a several PSU revisions with different power connectors).

[hero1900]

https://imgur.com/a/0OkmO12

Might be a 5th model but these ones in the pic I've converted.

HI thank you for sharing i was searching the whole internet for this. can you please help me with my xbox power supply. i bought this for cheap and i didnt check the voltage and i attach it to 240v while it was a USA xbox. so the powersupply pooped. can it be fixed? and if so how i convert it while fixing it up? i know how to soldier well but i have basic knowledge in electronics. here is the pic of the psu


i see that the MOV mostly burned. the fuse also must be burned.
i can see that the z1 is the MOV do i need to remove and connect the pads between or leave them? and to fix i only just change the fuse? for the capacitor i understand that i need to change it as you mention in all pic. final question should i change the fuse rating? it is 250v 15A